[PATCH v2 02/11] dt-bindings: hwmon: lm75: use common hwmon schema

[Rob Herring]

On Thu, 29 Feb 2024 19:10:50 +0100, Théo Lebrun wrote:
> Reference common hwmon schema which has the generic "label" property,
> parsed by Linux hwmon subsystem.
> 
> To: Jean Delvare <jdelvare at suse.com>
> To: Guenter Roeck <linux at roeck-us.net>
> Cc: linux-hwmon at vger.kernel.org
> Signed-off-by: Théo Lebrun <theo.lebrun at bootlin.com>
> ---
>  Documentation/devicetree/bindings/hwmon/lm75.yaml | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/lm75.yaml:
Error in referenced schema matching $id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/lm75.example.dtb: sensor at 48: False schema does not allow {'compatible': ['st,stlm75'], 'reg': [[72]], 'vs-supply': [[4294967295]], '$nodename': ['sensor at 48']}
	from schema $id: http://devicetree.org/schemas/hwmon/lm75.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/lm75.example.dtb: temperature-sensor at 48: False schema does not allow {'compatible': ['ams,as6200'], 'reg': [[72]], 'vs-supply': [[4294967295]], 'interrupts': [[17, 3]], '$nodename': ['temperature-sensor at 48']}
	from schema $id: http://devicetree.org/schemas/hwmon/lm75.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240229-mbly-i2c-v2-2-b32ed18c098c@bootlin.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.