[PATCH v2 11/11] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor

[Théo Lebrun]

Declare the temperature sensor on I2C bus 2. Its label is the schematics
identifier.

Signed-off-by: Théo Lebrun <theo.lebrun at bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
index 6898b2d8267d..9fc1a1b0a81b 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
+++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
@@ -21,3 +21,11 @@ memory at 0 {
 		      <0x8 0x02000000 0x0 0x7E000000>;
 	};
 };
+
+&i2c2 {
+	temperature-sensor at 48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "U60";
+	};
+};

-- 
2.44.0