[PATCH v2 01/11] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example

[Théo Lebrun]

Add EyeQ5 bindings to the existing Nomadik I2C dt-bindings. Add the
EyeQ5-specific property behind a conditional. Add an example for this
compatible.

Signed-off-by: Théo Lebrun <theo.lebrun at bootlin.com>
---
 .../devicetree/bindings/i2c/st,nomadik-i2c.yaml    | 48 ++++++++++++++++++++--
 1 file changed, 44 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
index 16024415a4a7..2d9d5b276762 100644
--- a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -14,9 +14,6 @@ description: The Nomadik I2C host controller began its life in the ST
 maintainers:
   - Linus Walleij <linus.walleij at linaro.org>
 
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
 # Need a custom select here or 'arm,primecell' will match on lots of nodes
 select:
   properties:
@@ -24,6 +21,7 @@ select:
       contains:
         enum:
           - st,nomadik-i2c
+          - mobileye,eyeq5-i2c
   required:
     - compatible
 
@@ -39,6 +37,10 @@ properties:
           - const: stericsson,db8500-i2c
           - const: st,nomadik-i2c
           - const: arm,primecell
+      # The variant found on Mobileye EyeQ5
+      - items:
+          - const: mobileye,eyeq5-i2c
+          - const: arm,primecell
 
   reg:
     maxItems: 1
@@ -55,7 +57,7 @@ properties:
       - items:
           - const: mclk
           - const: apb_pclk
-      # Clock name in DB8500
+      # Clock name in DB8500 or EyeQ5
       - items:
           - const: i2cclk
           - const: apb_pclk
@@ -70,6 +72,16 @@ properties:
     minimum: 1
     maximum: 400000
 
+  mobileye,olb:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to OLB system controller node.
+          - description: Platform-wide controller ID (integer starting from zero).
+    description:
+      The phandle pointing to OLB system controller node, with the I2C
+      controller index.
+
 required:
   - compatible
   - reg
@@ -79,6 +91,20 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-i2c
+    then:
+      required:
+        - mobileye,olb
+    else:
+      properties:
+        mobileye,olb: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -111,5 +137,19 @@ examples:
       clocks = <&i2c0clk>, <&pclki2c0>;
       clock-names = "mclk", "apb_pclk";
     };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    i2c at 300000 {
+      compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+      reg = <0x300000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+      clock-frequency = <400000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c_ser_clk>, <&i2c_clk>;
+      clock-names = "i2cclk", "apb_pclk";
+      mobileye,olb = <&olb 0>;
+    };
 
 ...

-- 
2.44.0