[PATCH net-next] net: ethernet: ti: am65-cpsw: Add priv-flag for Switch VLAN Aware mode

[Jiri Pirko]

Tue, Feb 27, 2024 at 09:28:15AM CET, s-vadapalli at ti.com wrote:
>The CPSW Ethernet Switch on TI's K3 SoCs can be configured to operate in
>VLAN Aware or VLAN Unaware modes of operation. This is different from
>the ALE being VLAN Aware and Unaware. The Ethernet Switch being VLAN Aware
>results in the addition/removal/replacement of VLAN tag of packets during
>egress as described in section "12.2.1.4.6.4.1 Transmit VLAN Processing" of
>the AM65x Technical Reference Manual available at:
>https://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
>In VLAN Unaware mode, packets remain unmodified on egress.
>
>The driver currently configures the Ethernet Switch in VLAN Aware mode by
>default and there is no support to toggle this capability of the Ethernet
>Switch at runtime. Thus, add support to toggle the capability by exporting
>it via the ethtool "priv-flags" interface.

I don't follow. You have all the means to offload all bridge/vlan
configurations properly and setup your hw according to that. See mlxsw
for a reference. I don't see the need for any custom driver knobs.