[PATCH v2 2/5] dt-bindings: media: Add bindings for ARM mali-c55

[Sakari Ailus]

Hi Laurent,

On Mon, Feb 26, 2024 at 02:04:31PM +0200, Laurent Pinchart wrote:
> Hi Sakari,
> 
> On Mon, Feb 26, 2024 at 11:54:22AM +0000, Sakari Ailus wrote:
> > On Wed, Feb 14, 2024 at 02:19:03PM +0000, Daniel Scally wrote:
> > > Add the yaml binding for ARM's Mali-C55 Image Signal Processor.
> > > 
> > > Acked-by: Nayden Kanchev <nayden.kanchev at arm.com>
> > > Signed-off-by: Daniel Scally <dan.scally at ideasonboard.com>
> > > ---
> > > Changes in v2:
> > > 
> > > 	- Added clocks information
> > > 	- Fixed the warnings raised by Rob
> > > 
> > >  .../bindings/media/arm,mali-c55.yaml          | 77 +++++++++++++++++++
> > >  1 file changed, 77 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/media/arm,mali-c55.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/media/arm,mali-c55.yaml b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml
> > > new file mode 100644
> > > index 000000000000..30038cfec3a4
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml
> > > @@ -0,0 +1,77 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/arm,mali-c55.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: ARM Mali-C55 Image Signal Processor
> > > +
> > > +maintainers:
> > > +  - Daniel Scally <dan.scally at ideasonboard.com>
> > > +  - Jacopo Mondi <jacopo.mondi at ideasonboard.com>
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: arm,mali-c55
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: ISP video clock
> > > +      - description: ISP AXI clock
> > > +      - description: ISP AHB-lite clock
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: vclk
> > > +      - const: aclk
> > > +      - const: hclk
> > > +
> > > +  ports:
> > > +    $ref: /schemas/graph.yaml#/properties/ports
> > > +
> > > +    properties:
> > > +      port at 0:
> > > +        $ref: /schemas/graph.yaml#/properties/port
> > > +
> > > +        properties:
> > > +          endpoint:
> > > +            $ref: /schemas/graph.yaml#/properties/endpoint
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - interrupts
> > > +  - clocks
> > > +  - clock-names
> > > +  - ports
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    mali_c55: isp at 400000 {
> > > +      compatible = "arm,mali-c55";
> > > +      reg = <0x400000 0x200000>;
> > > +      clocks = <&clk 0>, <&clk 1>, <&clk 2>;
> > > +      clock-names = "vclk", "aclk", "hclk";
> > > +      interrupts = <0>;
> > > +
> > > +      ports {
> > > +        #address-cells = <1>;
> > > +        #size-cells = <0>;
> > > +
> > > +        port at 0 {
> > > +          reg = <0>;
> > > +          isp_in: endpoint {
> > > +              remote-endpoint = <&mipi_out>;
> > 
> > I suppose this is a CSI-2 interface with D-PHY?
> 
> No, that's an internal parallel bus. Depending on the SoC integration,
> it can be connected to a CSI-2 receiver, a DMA engine, or a mux to
> select between different sources.

The name suggests otherwise. Maybe change that to something more
descriptive?

> 
> > How many lanes do you have and is lane remapping / polarity inversion
> > supported?
> > 
> > This should be reflected in bindings.
> > 
> > > +          };
> > > +        };
> > > +      };
> > > +    };
> > > +...
> 

-- 
Regards,

Sakari Ailus