[PATCH 1/2] dt-bindings: thermal: convert st,stih407-thermal to DT schema

Raphael Gallais-Pou rgallaispou at gmail.com
Sun Feb 25 23:48:38 PST 2024


Converts st,stih407-thermal binding to DT schema format and cleans
unused property "st,passive_cooling_temp" which does not appear in the
device-tree.

Signed-off-by: Raphael Gallais-Pou <rgallaispou at gmail.com>
---
 .../bindings/thermal/st,stih407-thermal.yaml       | 61 ++++++++++++++++++++++
 .../devicetree/bindings/thermal/st-thermal.txt     | 32 ------------
 2 files changed, 61 insertions(+), 32 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml
new file mode 100644
index 000000000000..807f8d77edf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/st,stih407-thermal.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/st,stih407-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi digital thermal sensor (DTS)
+
+maintainers:
+  - Patrice Chotard <patrice.chotard at foss.st.com>
+  - Lee Jones <lee at kernel.org>
+
+description:
+  Binding for Thermal Sensor device for STMicroelectronics STi SoCs series.
+
+allOf:
+  - $ref: thermal-sensor.yaml
+
+properties:
+  compatible:
+    const: st,stih407-thermal
+
+  clocks:
+    maxItems: 1
+    description: Phandle of the clock used by the thermal sensor.
+
+  clock-names:
+    items:
+      - const: thermal
+
+  reg:
+    description:
+      For non-sysconf based sensors, this should be the physical base
+      address and length of the sensor's registers.
+
+  interrupts:
+    description: |
+      Standard way to define interrupt number.
+      For thermal sensor's for which no interrupt has been
+      defined, a polling delay of 1000ms will be used to read the
+      temperature from device.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    temp0 at 91a0000 {
+        compatible = "st,stih407-thermal";
+        reg = <0x91a0000 0x28>;
+        clock-names = "thermal";
+        clocks = <&CLK_SYSIN>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+        #thermal-sensor-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
deleted file mode 100644
index a2f939137e35..000000000000
--- a/Documentation/devicetree/bindings/thermal/st-thermal.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
-
-Required parameters:
--------------------
-
-compatible : 	Should be "st,stih407-thermal"
-
-clock-names : 	Should be "thermal".
-		  See: Documentation/devicetree/bindings/resource-names.txt
-clocks : 	Phandle of the clock used by the thermal sensor.
-		  See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional parameters:
--------------------
-
-reg : 		For non-sysconf based sensors, this should be the physical base
-		address and length of the sensor's registers.
-interrupts :	Standard way to define interrupt number.
-		  NB: For thermal sensor's for which no interrupt has been
-		  defined, a polling delay of 1000ms will be used to read the
-		  temperature from device.
-
-Example:
-
-	temp0 at 91a0000 {
-		compatible = "st,stih407-thermal";
-		reg = <0x91a0000 0x28>;
-		clock-names = "thermal";
-		clocks = <&CLK_SYSIN>;
-		interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
-		st,passive_cooling_temp = <110>;
-	};

-- 
2.43.2




More information about the linux-arm-kernel mailing list