[RFC PATCH 1/1] clk: sunxi-ng: h6-r: add GPU power domain

Andre Przywara andre.przywara at arm.com
Sun Feb 25 08:06:16 PST 2024


The Allwinner H616 features register 0x7010254 in the PRCM MMIO frame,
where bit 0 needs to be cleared to enable operation of the Mali GPU.
With this bit set (the reset default), any access to the Mali registers
hangs the bus and thus the whole system. The BSP code clears this bit
in U-Boot and their kernel never touches it again.

Register a power-domain device to control this bit. Since we claim this
MMIO region in the H6 R-CCU driver, add the code here, so that we don't
need to artificially split the MMIO range in the DT.
Since there seems to be at least one other register with similar behaviour
nearby (0x7010260), make the power domain take one cell, even though we
only support domain #0 for now.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 84 ++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
index 02b28cfc5525e..363fb7a71e9f5 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
@@ -4,9 +4,11 @@
  */
 
 #include <linux/clk-provider.h>
+#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
 
 #include "ccu_common.h"
 #include "ccu_reset.h"
@@ -217,6 +219,86 @@ static const struct sunxi_ccu_desc sun50i_h616_r_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_h616_r_ccu_resets),
 };
 
+#define	PD_H616_GPU_REG			0x254
+
+struct sun50i_h616_ppu_pd {
+	struct generic_pm_domain	genpd;
+	void __iomem			*base;
+};
+
+#define to_sun50i_h616_ppu_pd(_genpd) \
+	container_of(_genpd, struct sun50i_h616_ppu_pd, genpd)
+
+static bool sun50i_h616_ppu_power_status(const struct sun50i_h616_ppu_pd *pd)
+{
+	return !readl(pd->base + PD_H616_GPU_REG);
+}
+
+static int sun50i_h616_ppu_pd_set_power(const struct sun50i_h616_ppu_pd *pd,
+					bool power_on)
+{
+	if (power_on)
+		writel(0, pd->base + PD_H616_GPU_REG);
+	else
+		writel(1, pd->base + PD_H616_GPU_REG);
+
+	return 0;
+}
+
+static int sun50i_h616_ppu_pd_power_on(struct generic_pm_domain *genpd)
+{
+	const struct sun50i_h616_ppu_pd *pd = to_sun50i_h616_ppu_pd(genpd);
+
+	return sun50i_h616_ppu_pd_set_power(pd, true);
+}
+
+static int sun50i_h616_ppu_pd_power_off(struct generic_pm_domain *genpd)
+{
+	const struct sun50i_h616_ppu_pd *pd = to_sun50i_h616_ppu_pd(genpd);
+
+	return sun50i_h616_ppu_pd_set_power(pd, false);
+}
+
+static int sun50i_h616_register_ppu(struct platform_device *pdev,
+				    void __iomem *base)
+{
+	struct device *dev = &pdev->dev;
+	struct genpd_onecell_data *ppu;
+	struct sun50i_h616_ppu_pd *pd;
+	int ret;
+
+	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	ppu = devm_kzalloc(dev, sizeof(*ppu), GFP_KERNEL);
+	if (!ppu)
+		return -ENOMEM;
+
+	ppu->domains = devm_kzalloc(dev, sizeof(*ppu->domains), GFP_KERNEL);
+	if (!ppu->domains)
+		return -ENOMEM;
+
+	ppu->num_domains = 1;
+	pd->genpd.name		= "GPU";
+	pd->genpd.power_off	= sun50i_h616_ppu_pd_power_off;
+	pd->genpd.power_on	= sun50i_h616_ppu_pd_power_on;
+	pd->base		= base;
+
+	ret = pm_genpd_init(&pd->genpd, NULL, !sun50i_h616_ppu_power_status(pd));
+	if (ret) {
+		dev_warn(dev, "Failed to add GPU power domain: %d\n", ret);
+		return ret;
+	}
+
+	ppu->domains[0] = &pd->genpd;
+	ret = of_genpd_add_provider_onecell(dev->of_node, ppu);
+	if (ret)
+		dev_warn(dev, "Failed to add provider: %d\n", ret);
+
+	return 0;
+}
+
 static int sun50i_h6_r_ccu_probe(struct platform_device *pdev)
 {
 	const struct sunxi_ccu_desc *desc;
@@ -230,6 +312,8 @@ static int sun50i_h6_r_ccu_probe(struct platform_device *pdev)
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
+	sun50i_h616_register_ppu(pdev, reg);
+
 	return devm_sunxi_ccu_probe(&pdev->dev, reg, desc);
 }
 
-- 
2.35.8




More information about the linux-arm-kernel mailing list