[PATCH v3] thermal/drivers/sun8i: Don't fail probe due to zone registration failure

[Daniel Lezcano]

On 24/01/2024 00:33, Mark Brown wrote:
> Currently the sun8i thermal driver will fail to probe if any of the
> thermal zones it is registering fails to register with the thermal core.
> Since we currently do not define any trip points for the GPU thermal
> zones on at least A64 or H5 this means that we have no thermal support
> on these platforms:
> 
> [    1.698703] thermal_sys: Failed to find 'trips' node
> [    1.698707] thermal_sys: Failed to find trip points for thermal-sensor id=1
> 
> even though the main CPU thermal zone on both SoCs is fully configured.
> This does not seem ideal, while we may not be able to use all the zones
> it seems better to have those zones which are usable be operational.
> Instead just carry on registering zones if we get any non-deferral
> error, allowing use of those zones which are usable.
> 
> This means that we also need to update the interrupt handler to not
> attempt to notify the core for events on zones which we have not
> registered, I didn't see an ability to mask individual interrupts and
> I would expect that interrupts would still be indicated in the ISR even
> if they were masked.
> 
> Reviewed-by: Vasily Khoruzhick <anarsoul at gmail.com>
> Acked-by: Jernej Skrabec <jernej.skrabec at gmail.com>
> Signed-off-by: Mark Brown <broonie at kernel.org>
> ---

Applied, thanks

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog