[PATCH v1] ARM: dts: imx7: remove DSI port endpoints

[Francesco Dolcini]

On Fri, Feb 16, 2024 at 11:42:55AM +0100, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini at toradex.com>
> 
> This fixes the display not working on colibri imx7, the driver fails to
> load with the following error:
> 
>   mxsfb 30730000.lcdif: error -ENODEV: Cannot connect bridge
> 
> NXP i.MX7 LCDIF is connected to both the Parallel LCD Display and to a
> MIPI DSI IP block, currently it's not possible to describe the
> connection to both.
> 
> Remove the port endpoint from the SOC dtsi to prevent regressions, this
> would need to be defined on the board DTS.
> 
> Reported-by: Hiago De Franco <hiagofranco at gmail.com>
> Closes: https://lore.kernel.org/r/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/
> Fixes: edbbae7fba49 ("ARM: dts: imx7: add MIPI-DSI support")
> Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>

Hello Shawn, what do you plan to do with this?

This fixes a regression from v6.8-rc1 and would be nice to have it into
the final v6.8.

Francesco