[PATCH v2 4/4] arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO

[Yashwanth Varakala]

From: Dominik Haller <d.haller at phytec.de>

Removes the pull-up resistor from the pad's settings to keep it
consistent for all boards. We have pull-ups in hardware on all boards so we
don't need to set the additional one from the iomux controller.

Signed-off-by: Dominik Haller <d.haller at phytec.de>
Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
Signed-off-by: Yashwanth Varakala <y.varakala at phytec.de>
---
Changes in v2:
-Corrected the Authorship.

 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index d36ce66f08ef..1dfc5f429981 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -334,7 +334,7 @@ MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS	0x140
 
 	pinctrl_usdhc2_pins: usdhc2-gpiogrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x40
 		>;
 	};
 
-- 
2.34.1