[PATCH 3/4] arm64: dts: mediatek: mt7981: add pinctrl

[AngeloGioacchino Del Regno]

Il 21/02/24 08:35, Rafał Miłecki ha scritto:
> From: Rafał Miłecki <rafal at milecki.pl>
> 
> MT7981 contains on-SoC PIN controller that is also a GPIO provider.
> 
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
>   arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 37 +++++++++++++++++++++++
>   1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
> index 4feff3d1c5f4..fdd5c22cfc9c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
> @@ -86,6 +86,43 @@ pwm at 10048000 {
>   			#pwm-cells = <2>;
>   		};
>   
> +		pio: pinctrl at 11d00000 {
> +			compatible = "mediatek,mt7981-pinctrl";
> +			reg = <0 0x11d00000 0 0x1000>,
> +			      <0 0x11c00000 0 0x1000>,
> +			      <0 0x11c10000 0 0x1000>,
> +			      <0 0x11d20000 0 0x1000>,
> +			      <0 0x11e00000 0 0x1000>,
> +			      <0 0x11e20000 0 0x1000>,
> +			      <0 0x11f00000 0 0x1000>,
> +			      <0 0x11f10000 0 0x1000>,
> +			      <0 0x1000b000 0 0x1000>;
> +			reg-names = "gpio", "iocfg_rt", "iocfg_rm", "iocfg_rb", "iocfg_lb",
> +				    "iocfg_bl", "iocfg_tm", "iocfg_tl", "eint";
> +			interrupt-controller;
> +			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-parent = <&gic>;
> +			gpio-ranges = <&pio 0 0 56>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			#interrupt-cells = <2>;
> +
> +			mdio-pins {
> +				mux {

That's board specific. MDIO and SPI0 pins can be used as GPIO instead of,
respectively, ETH and SPI.

Must go to your board devicetree, not here: please move both.

Cheers,
Angelo

> +					function = "eth";
> +					groups = "smi_mdc_mdio";
> +				};
> +			};
> +
> +			spi0-pins {
> +				mux {
> +					function = "spi";
> +					groups = "spi0", "spi0_wp_hold";
> +				};
> +			};
> +
> +		};
> +
>   		clock-controller at 15000000 {
>   			compatible = "mediatek,mt7981-ethsys", "syscon";
>   			reg = <0 0x15000000 0 0x1000>;