[PATCH v5 3/4] arm64: dts: nuvoton: Add pinctrl support for ma35d1
Jacky Huang
ychuang570808 at gmail.com
Mon Feb 19 16:41:58 PST 2024
From: Jacky Huang <ychuang3 at nuvoton.com>
Add 'pinctrl' node and 'gpioa' ~ 'gpion' nodes to the dtsi of ma35d1
SoC and describe default pin configurations.
Enable all UART nodes presented on som and iot boards, and add pinctrl
function settings to these nodes.
Signed-off-by: Jacky Huang <ychuang3 at nuvoton.com>
---
.../boot/dts/nuvoton/ma35d1-iot-512m.dts | 80 +++++++++-
.../boot/dts/nuvoton/ma35d1-som-256m.dts | 83 +++++++++-
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 150 +++++++++++++++++-
3 files changed, 304 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
index b89e2be6abae..9482bec1aa57 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
@@ -14,6 +14,10 @@ / {
aliases {
serial0 = &uart0;
+ serial10 = &uart10;
+ serial12 = &uart12;
+ serial13 = &uart13;
+ serial14 = &uart14;
};
chosen {
@@ -33,10 +37,6 @@ clk_hxt: clock-hxt {
};
};
-&uart0 {
- status = "okay";
-};
-
&clk {
assigned-clocks = <&clk CAPLL>,
<&clk DDRPLL>,
@@ -54,3 +54,75 @@ &clk {
"integer",
"integer";
};
+
+&pinctrl {
+ uart-grp {
+ pinctrl_uart0: uart0-pins {
+ nuvoton,pins = <4 14 1>,
+ <4 15 1>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart10: uart10-pins {
+ nuvoton,pins = <7 4 2>,
+ <7 5 2>,
+ <7 6 2>,
+ <7 7 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart12: uart12-pins {
+ nuvoton,pins = <2 13 2>,
+ <2 14 2>,
+ <2 15 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart13: uart13-pins {
+ nuvoton,pins = <7 12 3>,
+ <7 13 3>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart14: uart14-pins {
+ nuvoton,pins = <7 14 2>,
+ <7 15 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart10>;
+ status = "okay";
+};
+
+&uart12 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart12>;
+ status = "okay";
+};
+
+&uart13 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart13>;
+ status = "okay";
+};
+
+&uart14 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart14>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index a1ebddecb7f8..f6f20a17e501 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -14,6 +14,10 @@ / {
aliases {
serial0 = &uart0;
+ serial11 = &uart11;
+ serial12 = &uart12;
+ serial14 = &uart14;
+ serial16 = &uart16;
};
chosen {
@@ -33,10 +37,6 @@ clk_hxt: clock-hxt {
};
};
-&uart0 {
- status = "okay";
-};
-
&clk {
assigned-clocks = <&clk CAPLL>,
<&clk DDRPLL>,
@@ -54,3 +54,78 @@ &clk {
"integer",
"integer";
};
+
+&pinctrl {
+ uart-grp {
+ pinctrl_uart0: uart0-pins {
+ nuvoton,pins = <4 14 1>,
+ <4 15 1>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart11: uart11-pins {
+ nuvoton,pins = <11 0 2>,
+ <11 1 2>,
+ <11 2 2>,
+ <11 3 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart12: uart12-pins {
+ nuvoton,pins = <8 1 2>,
+ <8 2 2>,
+ <8 3 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart14: uart14-pins {
+ nuvoton,pins = <8 5 2>,
+ <8 6 2>,
+ <8 7 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ pinctrl_uart16: uart16-pins {
+ nuvoton,pins = <10 0 2>,
+ <10 1 2>,
+ <10 2 2>,
+ <10 3 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart11 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart11>;
+ status = "okay";
+};
+
+&uart12 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart12>;
+ status = "okay";
+};
+
+&uart14 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart14>;
+ status = "okay";
+};
+
+&uart16 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart16>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index 781cdae566a0..5f366f4c7fde 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -83,7 +83,7 @@ soc {
ranges;
sys: system-management at 40460000 {
- compatible = "nuvoton,ma35d1-reset";
+ compatible = "nuvoton,ma35d1-reset", "syscon";
reg = <0x0 0x40460000 0x0 0x200>;
#reset-cells = <1>;
};
@@ -95,6 +95,154 @@ clk: clock-controller at 40460200 {
clocks = <&clk_hxt>;
};
+ pinctrl: pinctrl at 40040000 {
+ compatible = "nuvoton,ma35d1-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nuvoton,sys = <&sys>;
+ ranges = <0x0 0x0 0x40040000 0xc00>;
+
+ gpioa: gpio at 0 {
+ reg = <0x0 0x40>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPA_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiob: gpio at 40 {
+ reg = <0x40 0x40>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPB_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioc: gpio at 80 {
+ reg = <0x80 0x40>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPC_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiod: gpio at c0 {
+ reg = <0xc0 0x40>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPD_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioe: gpio at 100 {
+ reg = <0x100 0x40>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPE_GATE>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiof: gpio at 140 {
+ reg = <0x140 0x40>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPF_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiog: gpio at 180 {
+ reg = <0x180 0x40>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPG_GATE>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioh: gpio at 1c0 {
+ reg = <0x1c0 0x40>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPH_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioi: gpio at 200 {
+ reg = <0x200 0x40>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPI_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpioj: gpio at 240 {
+ reg = <0x240 0x40>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPJ_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiok: gpio at 280 {
+ reg = <0x280 0x40>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPK_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiol: gpio at 2c0 {
+ reg = <0x2c0 0x40>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPL_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpiom: gpio at 300 {
+ reg = <0x300 0x40>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPM_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpion: gpio at 340 {
+ reg = <0x340 0x40>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPN_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
uart0: serial at 40700000 {
compatible = "nuvoton,ma35d1-uart";
reg = <0x0 0x40700000 0x0 0x100>;
--
2.34.1
More information about the linux-arm-kernel
mailing list