[PATCH v1 2/2] mmc: meson-mx-sdhc: Remove .card_hw_reset callback

Martin Blumenstingl martin.blumenstingl at googlemail.com
Sat Feb 17 02:02:00 PST 2024


Commit 32f18e596141 ("mmc: improve API to make clear hw_reset callback
is for cards") made it clear that the hw_reset callback is intended for
resetting the card. Remove the .card_hw_reset callback from the
meson-mx-sdhc-mmc driver because it's purpose is to reset the SDHC
controller (FIFOs, PHY, DMA interface, ...).

While here also rename and change the argument of meson_mx_sdhc_hw_reset
so it cannot be called by accident as a replacement for card_hw_reset in
the future.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 drivers/mmc/host/meson-mx-sdhc-mmc.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/meson-mx-sdhc-mmc.c b/drivers/mmc/host/meson-mx-sdhc-mmc.c
index 1ed9731e77ef..31f750301dc1 100644
--- a/drivers/mmc/host/meson-mx-sdhc-mmc.c
+++ b/drivers/mmc/host/meson-mx-sdhc-mmc.c
@@ -65,10 +65,8 @@ static const struct regmap_config meson_mx_sdhc_regmap_config = {
 	.max_register = MESON_SDHC_CLK2,
 };
 
-static void meson_mx_sdhc_hw_reset(struct mmc_host *mmc)
+static void meson_mx_sdhc_reset(struct meson_mx_sdhc_host *host)
 {
-	struct meson_mx_sdhc_host *host = mmc_priv(mmc);
-
 	regmap_write(host->regmap, MESON_SDHC_SRST, MESON_SDHC_SRST_MAIN_CTRL |
 		     MESON_SDHC_SRST_RXFIFO | MESON_SDHC_SRST_TXFIFO |
 		     MESON_SDHC_SRST_DPHY_RX | MESON_SDHC_SRST_DPHY_TX |
@@ -116,7 +114,7 @@ static void meson_mx_sdhc_wait_cmd_ready(struct mmc_host *mmc)
 		dev_warn(mmc_dev(mmc),
 			 "Failed to poll for CMD_BUSY while processing CMD%d\n",
 			 host->cmd->opcode);
-		meson_mx_sdhc_hw_reset(mmc);
+		meson_mx_sdhc_reset(host);
 	}
 
 	ret = regmap_read_poll_timeout(host->regmap, MESON_SDHC_ESTA, esta,
@@ -127,7 +125,7 @@ static void meson_mx_sdhc_wait_cmd_ready(struct mmc_host *mmc)
 		dev_warn(mmc_dev(mmc),
 			 "Failed to poll for ESTA[13:11] while processing CMD%d\n",
 			 host->cmd->opcode);
-		meson_mx_sdhc_hw_reset(mmc);
+		meson_mx_sdhc_reset(host);
 	}
 }
 
@@ -495,7 +493,6 @@ static int meson_mx_sdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 }
 
 static const struct mmc_host_ops meson_mx_sdhc_ops = {
-	.card_hw_reset			= meson_mx_sdhc_hw_reset,
 	.request			= meson_mx_sdhc_request,
 	.set_ios			= meson_mx_sdhc_set_ios,
 	.card_busy			= meson_mx_sdhc_card_busy,
@@ -618,7 +615,7 @@ static irqreturn_t meson_mx_sdhc_irq_thread(int irq, void *irq_data)
 	}
 
 	if (cmd->error == -EIO || cmd->error == -ETIMEDOUT)
-		meson_mx_sdhc_hw_reset(host->mmc);
+		meson_mx_sdhc_reset(host);
 	else if (cmd->data)
 		/*
 		 * Clear the FIFOs after completing data transfers to prevent
@@ -728,7 +725,7 @@ static void meson_mx_sdhc_init_hw(struct mmc_host *mmc)
 {
 	struct meson_mx_sdhc_host *host = mmc_priv(mmc);
 
-	meson_mx_sdhc_hw_reset(mmc);
+	meson_mx_sdhc_reset(host);
 
 	regmap_write(host->regmap, MESON_SDHC_CTRL,
 		     FIELD_PREP(MESON_SDHC_CTRL_RX_PERIOD, 0xf) |
-- 
2.43.2




More information about the linux-arm-kernel mailing list