[PATCH 12/13] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Thu Feb 15 23:59:11 PST 2024


On 15/02/2024 17:52, Théo Lebrun wrote:
> Declare the temperature sensor on I2C bus 2. Its label is the schematics
> identifier.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun at bootlin.com>
> ---
>  arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> index 6898b2d8267d..1f8549acd40d 100644
> --- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> +++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> @@ -21,3 +21,11 @@ memory at 0 {
>  		      <0x8 0x02000000 0x0 0x7E000000>;
>  	};
>  };
> +
> +&i2c2 {
> +	tmp112 at 48 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation


temperature-sensor, power-sensor etc.

Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list