[PATCH RFC v3 3/4] spmi: pmic-arb: Make core resources acquiring a version operation

Abel Vesa abel.vesa at linaro.org
Thu Feb 15 05:32:08 PST 2024


On 24-02-15 11:30:23, Dmitry Baryshkov wrote:
> On Wed, 14 Feb 2024 at 23:36, Abel Vesa <abel.vesa at linaro.org> wrote:
> >
> > On 24-02-14 22:18:33, Konrad Dybcio wrote:
> > > On 14.02.2024 22:13, Abel Vesa wrote:
> > > > Rather than setting up the core, obsrv and chnls in probe by using
> > > > version specific conditionals, add a dedicated "get_core_resources"
> > > > version specific op and move the acquiring in there.
> > > >
> > > > Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> > > > ---
> > > >  drivers/spmi/spmi-pmic-arb.c | 111 ++++++++++++++++++++++++++++++-------------
> > > >  1 file changed, 78 insertions(+), 33 deletions(-)
> > > >
> > > > diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> > > > index 23939c0d225f..489556467a4c 100644
> > > > --- a/drivers/spmi/spmi-pmic-arb.c
> > > > +++ b/drivers/spmi/spmi-pmic-arb.c
> > > > @@ -203,6 +203,7 @@ struct spmi_pmic_arb {
> > > >   */
> > > >  struct pmic_arb_ver_ops {
> > > >     const char *ver_str;
> > > > +   int (*get_core_resources)(struct platform_device *pdev, void __iomem *core);
> > > >     int (*init_apid)(struct spmi_pmic_arb *pmic_arb, int index);
> > > >     int (*ppid_to_apid)(struct spmi_pmic_arb *pmic_arb, u16 ppid);
> > > >     /* spmi commands (read_cmd, write_cmd, cmd) functionality */
> > > > @@ -956,6 +957,19 @@ static int pmic_arb_init_apid_min_max(struct spmi_pmic_arb *pmic_arb)
> > > >     return 0;
> > > >  }
> > > >
> > > > +static int pmic_arb_get_core_resources_v1(struct platform_device *pdev,
> > > > +                                     void __iomem *core)
> > > > +{
> > > > +   struct spmi_pmic_arb *pmic_arb = platform_get_drvdata(pdev);
> > > > +
> > > > +   pmic_arb->wr_base = core;
> > > > +   pmic_arb->rd_base = core;
> > > > +
> > > > +   pmic_arb->max_periphs = PMIC_ARB_MAX_PERIPHS;
> > > > +
> > > > +   return 0;
> > > > +}
> > > > +
> > > >  static int pmic_arb_init_apid_v1(struct spmi_pmic_arb *pmic_arb, int index)
> > > >  {
> > > >     u32 *mapping_table;
> > > > @@ -1063,6 +1077,41 @@ static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pmic_arb, u16 ppid)
> > > >     return apid;
> > > >  }
> > > >
> > > > +static int pmic_arb_get_obsrvr_chnls_v2(struct platform_device *pdev)
> > > > +{
> > > > +   struct spmi_pmic_arb *pmic_arb = platform_get_drvdata(pdev);
> > > > +   struct device *dev = &pdev->dev;
> > > > +   struct resource *res;
> > > > +
> > > > +   res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > >
> > > It's no longer indented to deep, no need to keep such aggressive wrapping
> > >
> >
> > The pmic_arb_get_obsrvr_chnls_v2 is used by both:
> > pmic_arb_get_core_resources_v2
> > pmic_arb_get_core_resources_v7
> >
> > > > +                                      "obsrvr");
> > > > +   pmic_arb->rd_base = devm_ioremap(dev, res->start,
> > > > +                                    resource_size(res));
> > > > +   if (IS_ERR(pmic_arb->rd_base))
> > > > +           return PTR_ERR(pmic_arb->rd_base);
> > > > +
> > > > +   res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > > > +                                      "chnls");
> > > > +   pmic_arb->wr_base = devm_ioremap(dev, res->start,
> > > > +                                    resource_size(res));
> > > > +   if (IS_ERR(pmic_arb->wr_base))
> > > > +           return PTR_ERR(pmic_arb->wr_base);
> > >
> > > Could probably make it "devm_platform_get_and_ioremap_resource "
> >
> > The reason this needs to stay as is is because of reason explained by
> > the following comment found in probe:
> >
> > /*
> >  * Please don't replace this with devm_platform_ioremap_resource() or
> >  * devm_ioremap_resource().  These both result in a call to
> >  * devm_request_mem_region() which prevents multiple mappings of this
> >  * register address range.  SoCs with PMIC arbiter v7 may define two
> >  * arbiter devices, for the two physical SPMI interfaces, which  share
> >  * some register address ranges (i.e. "core", "obsrvr", and "chnls").
> >  * Ensure that both devices probe successfully by calling devm_ioremap()
> >  * which does not result in a devm_request_mem_region() call.
> >  */
> >
> > Even though, AFAICT, there is no platform that adds a second node for
> > the second bus, currently, in mainline, we should probably allow the
> > "legacy" approach to still work.
> 
> If there were no DT files which used two SPMI devices, I think we
> should drop this comment and use existing helpers. We must keep
> compatibility with the existing DTs, not with the _possible_ device
> trees.

Sure.

Should I drop the qcom,bus-id from the driver as well? It is optional
after all.

> 
> >
> > >
> > > Konrad
> 
> 
> 
> -- 
> With best wishes
> Dmitry



More information about the linux-arm-kernel mailing list