[PATCH v2 1/2] dt-bindings: auxdisplay: adjust example indentation and use generic node names
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Wed Feb 14 07:54:37 PST 2024
The example DTS should be indented with two or four (preferred) spaces,
as mentioned in Writing Schema document. While re-indenting, change the
node names to somehow generic names, as expected by Devicetree
specification.
Cc: Geert Uytterhoeven <geert at linux-m68k.org>
Cc: Ralf Schlatterbeck <rsc at runtux.com>
Cc: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
Changes in v2:
1. Previous, removing GPIO expander node is gone, update GPIO expander
example as well: node name and indentation.
---
.../auxdisplay/arm,versatile-lcd.yaml | 4 +-
.../bindings/auxdisplay/hit,hd44780.yaml | 62 ++++++++++---------
.../bindings/auxdisplay/holtek,ht16k33.yaml | 50 +++++++--------
.../bindings/auxdisplay/img,ascii-lcd.yaml | 4 +-
4 files changed, 61 insertions(+), 59 deletions(-)
diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
index 5d02bd032a85..439f7b811a94 100644
--- a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -39,6 +39,6 @@ additionalProperties: false
examples:
- |
lcd at 10008000 {
- compatible = "arm,versatile-lcd";
- reg = <0x10008000 0x1000>;
+ compatible = "arm,versatile-lcd";
+ reg = <0x10008000 0x1000>;
};
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index 406a922a714e..e26d61af9011 100644
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -84,42 +84,44 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- auxdisplay {
- compatible = "hit,hd44780";
+ display-controller {
+ compatible = "hit,hd44780";
- data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
- <&hc595 1 GPIO_ACTIVE_HIGH>,
- <&hc595 2 GPIO_ACTIVE_HIGH>,
- <&hc595 3 GPIO_ACTIVE_HIGH>;
- enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+ <&hc595 1 GPIO_ACTIVE_HIGH>,
+ <&hc595 2 GPIO_ACTIVE_HIGH>,
+ <&hc595 3 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+ rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
- display-height-chars = <2>;
- display-width-chars = <16>;
+ display-height-chars = <2>;
+ display-width-chars = <16>;
};
+
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- pcf8574: pcf8574 at 27 {
- compatible = "nxp,pcf8574";
- reg = <0x27>;
- gpio-controller;
- #gpio-cells = <2>;
- };
+ pcf8574: gpio-expander at 27 {
+ compatible = "nxp,pcf8574";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
- hd44780 {
- compatible = "hit,hd44780";
- display-height-chars = <2>;
- display-width-chars = <16>;
- data-gpios = <&pcf8574 4 0>,
- <&pcf8574 5 0>,
- <&pcf8574 6 0>,
- <&pcf8574 7 0>;
- enable-gpios = <&pcf8574 2 0>;
- rs-gpios = <&pcf8574 0 0>;
- rw-gpios = <&pcf8574 1 0>;
- backlight-gpios = <&pcf8574 3 0>;
+
+ display-controller {
+ compatible = "hit,hd44780";
+ display-height-chars = <2>;
+ display-width-chars = <16>;
+ data-gpios = <&pcf8574 4 0>,
+ <&pcf8574 5 0>,
+ <&pcf8574 6 0>,
+ <&pcf8574 7 0>;
+ enable-gpios = <&pcf8574 2 0>;
+ rs-gpios = <&pcf8574 0 0>;
+ rw-gpios = <&pcf8574 1 0>;
+ backlight-gpios = <&pcf8574 3 0>;
};
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index be95f6b97b41..b90eec2077b4 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -74,31 +74,31 @@ examples:
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- ht16k33: ht16k33 at 70 {
- compatible = "holtek,ht16k33";
- reg = <0x70>;
- refresh-rate-hz = <20>;
- interrupt-parent = <&gpio4>;
- interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
- debounce-delay-ms = <50>;
- linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
- <MATRIX_KEY(3, 0, KEY_F8)>,
- <MATRIX_KEY(4, 0, KEY_F10)>,
- <MATRIX_KEY(5, 0, KEY_F4)>,
- <MATRIX_KEY(6, 0, KEY_F2)>,
- <MATRIX_KEY(2, 1, KEY_F5)>,
- <MATRIX_KEY(3, 1, KEY_F7)>,
- <MATRIX_KEY(4, 1, KEY_F9)>,
- <MATRIX_KEY(5, 1, KEY_F3)>,
- <MATRIX_KEY(6, 1, KEY_F1)>;
+ display-controller at 70 {
+ compatible = "holtek,ht16k33";
+ reg = <0x70>;
+ refresh-rate-hz = <20>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+ debounce-delay-ms = <50>;
+ linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+ <MATRIX_KEY(3, 0, KEY_F8)>,
+ <MATRIX_KEY(4, 0, KEY_F10)>,
+ <MATRIX_KEY(5, 0, KEY_F4)>,
+ <MATRIX_KEY(6, 0, KEY_F2)>,
+ <MATRIX_KEY(2, 1, KEY_F5)>,
+ <MATRIX_KEY(3, 1, KEY_F7)>,
+ <MATRIX_KEY(4, 1, KEY_F9)>,
+ <MATRIX_KEY(5, 1, KEY_F3)>,
+ <MATRIX_KEY(6, 1, KEY_F1)>;
- led {
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_BACKLIGHT;
- linux,default-trigger = "backlight";
- };
+ led {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_BACKLIGHT;
+ linux,default-trigger = "backlight";
};
- };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
index 1899b23de7d1..55e9831b3f67 100644
--- a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
@@ -50,6 +50,6 @@ additionalProperties: false
examples:
- |
lcd: lcd at 17fff000 {
- compatible = "img,boston-lcd";
- reg = <0x17fff000 0x8>;
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
};
--
2.34.1
More information about the linux-arm-kernel
mailing list