[PATCH 0/5] Add display support for stm32mp135f-dk board

Alexandre TORGUE alexandre.torgue at foss.st.com
Wed Feb 14 05:40:58 PST 2024


Hi Raphael

On 2/5/24 10:06, Raphael Gallais-Pou wrote:
> This serie aims to enable display support for the stm32mp135f-dk board
> 
> Those are only patches of the device-tree since the driver support has
> already been added [1].
> 
> It respectivelly:
> 	- adds support for the display controller on stm32mp135
> 	- adds pinctrl for the display controller
> 	- enables panel, backlight and display controller on
> 	  stm32mp135f-dk
> 
> Finally it fixes the flags on the panel default mode in the
> 'panel-simple' driver, allowing to override the default mode by one
> described in the device tree, and push further the blanking limit on the
> panel.
> 
> [1] commit 1726cee3d053 ("drm/stm: ltdc: support of new hardware version")
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
> ---
> Raphael Gallais-Pou (5):
>        ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
>        ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
>        ARM: dts: stm32: enable display support on stm32mp135f-dk board
>        drm/panel: simple: fix flags on RK043FN48H
>        drm/panel: simple: push blanking limit on RK32FN48H
> 
>   arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 57 +++++++++++++++++++++++++++++
>   arch/arm/boot/dts/st/stm32mp135.dtsi        | 11 ++++++
>   arch/arm/boot/dts/st/stm32mp135f-dk.dts     | 55 ++++++++++++++++++++++++++++
>   drivers/gpu/drm/panel/panel-simple.c        |  7 ++--
>   4 files changed, 127 insertions(+), 3 deletions(-)
> ---
> base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
> change-id: 20240124-ltdc_mp13-2f86a782424c
> 
> Best regards,

I got the following errors during YAML verification:

arch/arm/boot/dts/st/stm32mp135f-dk.dtb: /soc/i2c at 40012000/pinctrl at 21: 
failed to match any schema with compatible: ['microchip,mcp23017']
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb: 
panel-backlight: 'default-brightness-level' does not match any of the 
regexes: 'pinctrl-[0-9]+'
	from schema $id: 
http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb: 
panel-rgb: data-mapping:0: 'bgr666' is not one of ['jeida-18', 
'jeida-24', 'vesa-24']
	from schema $id: 
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb: 
panel-rgb: compatible: ['rocktech,rk043fn48h', 'panel-dpi'] is too long
	from schema $id: 
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb: 
panel-rgb: data-mapping: False schema does not allow ['bgr666']
	from schema $id: 
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb: 
panel-rgb: 'height-mm', 'panel-timing', 'width-mm' do not match any of 
the regexes: 'pinctrl-[0-9]+'
	from schema $id: 
http://devicetree.org/schemas/display/panel/panel-simple.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp135f-dk.dtb: 
panel-rgb: 'data-mapping' does not match any of the regexes: 
'pinctrl-[0-9]+'
	from schema $id: 
http://devicetree.org/schemas/display/panel/panel-dpi.yaml#

Do I miss something ?

Alex





More information about the linux-arm-kernel mailing list