[PATCH v6 123/164] pwm: stmpe: Make use of devm_pwmchip_alloc() function

[Uwe Kleine-König]

This prepares the pwm-stmpe driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pwm/pwm-stmpe.c | 38 ++++++++++++++++++++------------------
 1 file changed, 20 insertions(+), 18 deletions(-)

diff --git a/drivers/pwm/pwm-stmpe.c b/drivers/pwm/pwm-stmpe.c
index 05f3f38031ee..bb91062d5f1d 100644
--- a/drivers/pwm/pwm-stmpe.c
+++ b/drivers/pwm/pwm-stmpe.c
@@ -27,13 +27,12 @@
 
 struct stmpe_pwm {
 	struct stmpe *stmpe;
-	struct pwm_chip chip;
 	u8 last_duty;
 };
 
 static inline struct stmpe_pwm *to_stmpe_pwm(struct pwm_chip *chip)
 {
-	return container_of(chip, struct stmpe_pwm, chip);
+	return pwmchip_get_drvdata(chip);
 }
 
 static int stmpe_24xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
@@ -292,33 +291,36 @@ static const struct pwm_ops stmpe_24xx_pwm_ops = {
 static int __init stmpe_pwm_probe(struct platform_device *pdev)
 {
 	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct pwm_chip *chip;
 	struct stmpe_pwm *stmpe_pwm;
 	int ret;
 
-	stmpe_pwm = devm_kzalloc(&pdev->dev, sizeof(*stmpe_pwm), GFP_KERNEL);
-	if (!stmpe_pwm)
-		return -ENOMEM;
+	switch (stmpe->partnum) {
+	case STMPE2401:
+	case STMPE2403:
+		break;
+	case STMPE1601:
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "STMPE1601 not yet supported\n");
+	default:
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "Unknown STMPE PWM\n");
+	}
+
+	chip = devm_pwmchip_alloc(&pdev->dev, 3, sizeof(*stmpe_pwm));
+	if (IS_ERR(chip))
+		return PTR_ERR(chip);
+	stmpe_pwm = to_stmpe_pwm(chip);
 
 	stmpe_pwm->stmpe = stmpe;
-	stmpe_pwm->chip.dev = &pdev->dev;
 
-	if (stmpe->partnum == STMPE2401 || stmpe->partnum == STMPE2403) {
-		stmpe_pwm->chip.ops = &stmpe_24xx_pwm_ops;
-		stmpe_pwm->chip.npwm = 3;
-	} else {
-		if (stmpe->partnum == STMPE1601)
-			dev_err(&pdev->dev, "STMPE1601 not yet supported\n");
-		else
-			dev_err(&pdev->dev, "Unknown STMPE PWM\n");
-
-		return -ENODEV;
-	}
+	chip->ops = &stmpe_24xx_pwm_ops;
 
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_PWM);
 	if (ret)
 		return ret;
 
-	ret = pwmchip_add(&stmpe_pwm->chip);
+	ret = pwmchip_add(chip);
 	if (ret) {
 		stmpe_disable(stmpe, STMPE_BLOCK_PWM);
 		return ret;
-- 
2.43.0