[PATCH v6 119/164] pwm: stm32-lp: Prepare removing pwm_chip from driver data

[Uwe Kleine-König]

This prepares the driver for further changes that will drop struct
pwm_chip chip from struct stm32_pwm_lp. Use the pwm_chip as driver
data instead of the stm32_pwm_lp to get access to the pwm_chip in
stm32_pwm_lp_suspend() without using priv->chip.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pwm/pwm-stm32-lp.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
index bbab6be314a8..b46d8193dd0f 100644
--- a/drivers/pwm/pwm-stm32-lp.c
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -197,6 +197,7 @@ static int stm32_pwm_lp_probe(struct platform_device *pdev)
 {
 	struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
 	struct stm32_pwm_lp *priv;
+	struct pwm_chip *chip;
 	int ret;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -205,28 +206,29 @@ static int stm32_pwm_lp_probe(struct platform_device *pdev)
 
 	priv->regmap = ddata->regmap;
 	priv->clk = ddata->clk;
-	priv->chip.dev = &pdev->dev;
-	priv->chip.ops = &stm32_pwm_lp_ops;
-	priv->chip.npwm = 1;
+	chip = &priv->chip;
+	chip->dev = &pdev->dev;
+	chip->ops = &stm32_pwm_lp_ops;
+	chip->npwm = 1;
 
-	ret = devm_pwmchip_add(&pdev->dev, &priv->chip);
+	ret = devm_pwmchip_add(&pdev->dev, chip);
 	if (ret < 0)
 		return ret;
 
-	platform_set_drvdata(pdev, priv);
+	platform_set_drvdata(pdev, chip);
 
 	return 0;
 }
 
 static int stm32_pwm_lp_suspend(struct device *dev)
 {
-	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
+	struct pwm_chip *chip = dev_get_drvdata(dev);
 	struct pwm_state state;
 
-	pwm_get_state(&priv->chip.pwms[0], &state);
+	pwm_get_state(&chip->pwms[0], &state);
 	if (state.enabled) {
 		dev_err(dev, "The consumer didn't stop us (%s)\n",
-			priv->chip.pwms[0].label);
+			chip->pwms[0].label);
 		return -EBUSY;
 	}
 
-- 
2.43.0