[PATCH v2 5/9] arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC

[Judith Mendez]

Add OTAP/ITAP values to enable HS400 timing for MMC0 and
SDR104 timing for MMC1/MMC2. Remove no-1-8-v property to
enable the highest speed mode possible.

Update MMC OTAP/ITAP values according to the datasheet
[0], refer to Table 7-79 for MMC0 and Table 7-97 for MMC1/MMC2.

[0] https://www.ti.com/lit/ds/symlink/am62p.pdf

Signed-off-by: Judith Mendez <jm at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 44 +++++++++++++++++++++--
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts   |  1 -
 2 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index ef1c982a90d8..e43530beb79f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -534,7 +534,21 @@ sdhci0: mmc at fa10000 {
 		clock-names = "clk_ahb", "clk_xin";
 		assigned-clocks = <&k3_clks 57 2>;
 		assigned-clock-parents = <&k3_clks 57 4>;
-		ti,otap-del-sel-legacy = <0x0>;
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		ti,clkbuf-sel = <0x7>;
+		ti,strobe-sel = <0x77>;
+		ti,trm-icp = <0x8>;
+		ti,otap-del-sel-legacy = <0x1>;
+		ti,otap-del-sel-mmc-hs = <0x1>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		status = "disabled";
 	};
 
@@ -545,7 +559,19 @@ sdhci1: mmc at fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,otap-del-sel-legacy = <0x8>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		status = "disabled";
 	};
 
@@ -556,7 +582,19 @@ sdhci2: mmc at fa20000 {
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,otap-del-sel-legacy = <0x8>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 95a0146279b1..8c73587b0b62 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -424,7 +424,6 @@ &sdhci1 {
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
-	no-1-8-v;
 	bootph-all;
 };
 
-- 
2.43.0