[PATCH v4 06/10] arm64: cpufeature: Detect HCR_EL2.NV1 being RES0

[Marc Zyngier]

On Mon, 12 Feb 2024 12:48:35 +0000,
Marek Szyprowski <m.szyprowski at samsung.com> wrote:
> 
> Dead All,
> 
> On 22.01.2024 19:13, Marc Zyngier wrote:
> > A variant of FEAT_E2H0 not being implemented exists in the form of
> > HCR_EL2.E2H being RES1 *and* HCR_EL2.NV1 being RES0 (indicating that
> > only VHE is supported on the host and nested guests).
> >
> > Add the necessary infrastructure for this new CPU capability.
> >
> > Reviewed-by: Suzuki K Poulose <suzuki.poulose at arm.com>
> > Signed-off-by: Marc Zyngier <maz at kernel.org>
> > ---
> 
> This patch landed recently in linux-next as commit da9af5071b25 ("arm64: 
> cpufeature: Detect HCR_EL2.NV1 being RES0"). I found that it causes a 
> following regression in the CPU hot-plug operation:
> 
> # for i in /sys/devices/system/cpu/cpu[1-9]; do echo 1 >$i/online; done
> ------------[ cut here ]------------
> kernel BUG at arch/arm64/kernel/cpufeature.c:1468!
> Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
> Modules linked in: dw_hdmi_cec dw_hdmi_i2s_audio crct10dif_ce 
> snd_soc_simple_card rockchip_saradc industrialio_triggered_buffer 
> hantro_vpu kfifo_buf snd_soc_simple_card_utils rockchip_thermal 
> phy_rockchip_naneng_combphy display_connector gpio_ir_recv v4l2_vp9 
> v4l2_h264 v4l2_mem2mem dwmac_rk videobuf2_dma_contig stmmac_platform 
> videobuf2_memops videobuf2_v4l2 stmmac rockchipdrm videodev 
> snd_soc_rockchip_i2s_tdm snd_soc_rk817 pcs_xpcs panfrost rtc_rk808 
> rk805_pwrkey analogix_dp rk817_charger spi_rockchip_sfc dw_mipi_dsi 
> videobuf2_common dw_hdmi drm_shmem_helper mc gpu_sched 
> drm_display_helper ahci_dwc ip_tables x_tables ipv6
> CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc1+ #14563
> Hardware name: Hardkernel ODROID-M1 (DT)
> pstate: 800001c9 (Nzcv dAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : __read_sysreg_by_encoding+0x38c/0x390
> lr : read_scoped_sysreg+0x4c/0x70
> ...
> Call trace:
>   __read_sysreg_by_encoding+0x38c/0x390
>   read_scoped_sysreg+0x4c/0x70
>   has_nv1+0x18/0x48
>   verify_local_cpu_caps+0x54/0x124
>   check_local_cpu_capabilities+0x28/0x208
>   secondary_start_kernel+0xb0/0x154
>   __secondary_switched+0xb8/0xbc
> Code: d53802f3 17ffff3b d5380253 17ffff39 (d4210000)
> ---[ end trace 0000000000000000 ]---
> Kernel panic - not syncing: Attempted to kill the idle task!
> SMP: stopping secondary CPUs
> Kernel Offset: disabled
> CPU features: 0x1,80000000,80050295,2100721b
> Memory Limit: none
> ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
> 
> It looks that some additional checks are needed for the CPU hot-plug case.

Nah, that's much simpler.

I simply missed a spot where ID_AA64MMFR4_EL1 must be handled (it is
getting annoying that we have more than a single place where these
"read all the ID registers" are handled).

Can you please give the following a go? If that works for you (it does
for me here), I'll post an actual fix (plus another fix for another
buglet I just noticed).

Thanks,

	M.

diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 0f29ac43c7a2..2f8958f27e9e 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1456,6 +1456,7 @@ u64 __read_sysreg_by_encoding(u32 sys_id)
 	read_sysreg_case(SYS_ID_AA64MMFR1_EL1);
 	read_sysreg_case(SYS_ID_AA64MMFR2_EL1);
 	read_sysreg_case(SYS_ID_AA64MMFR3_EL1);
+	read_sysreg_case(SYS_ID_AA64MMFR4_EL1);
 	read_sysreg_case(SYS_ID_AA64ISAR0_EL1);
 	read_sysreg_case(SYS_ID_AA64ISAR1_EL1);
 	read_sysreg_case(SYS_ID_AA64ISAR2_EL1);

-- 
Without deviation from the norm, progress is not possible.