[PATCH v2 0/3] arm64: dts: ti: Introduce J722S SoC and EVM

[Manorit Chawdhry]

Hi Vaishnav,

On 15:36-20240206, Vaishnav Achath wrote:
> This series adds basic support for J722S family of SoCs. Also add
> J722S EVM support with basic peripheral like MMC and UART.
> 
> TRM: https://www.ti.com/lit/zip/sprujb3
> EVM Schematics: https://www.ti.com/lit/zip/sprr495
> 
> Bootlog (6.8.0-rc3-next-20240206):
> https://gist.github.com/vaishnavachath/23d859925277df9ccd628190e7c23371
> 
> Changelog:
> V1->V2:
>   * Address feedback from Nishanth to reuse from AM62P5 dtsi.
>   * Remove bootph-all from root nodes.
>   * Change License to GPL-2.0-only OR MIT as followed for other
>     K3 files.
> 
> Vaishnav Achath (3):
>   dt-bindings: arm: ti: Add bindings for J722S SoCs
>   arm64: dts: ti: Introduce J722S family of SoCs
>   arm64: dts: ti: Add support for TI J722S Evaluation Module
> 

For the series, 

Reviewed-by: Manorit Chawdhry <m-chawdhry at ti.com>

Regards,
Manorit

>  .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
>  arch/arm64/boot/dts/ti/Makefile               |   3 +
>  arch/arm64/boot/dts/ti/k3-j722s-evm.dts       | 251 ++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-j722s.dtsi          |  89 +++++++
>  arch/arm64/boot/dts/ti/k3-pinctrl.h           |   3 +
>  5 files changed, 352 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-evm.dts
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j722s.dtsi
> 
> -- 
> 2.34.1
>