[PATCH 3/4] ARM: dts: gemini: Map reset keys to KEY_RESTART
Linus Walleij
linus.walleij at linaro.org
Sun Feb 11 13:24:25 PST 2024
This maps the misc "reset", "setup" and "facory reset" keys to the
only key a standard userspace is likely to understand: KEY_RESTART.
On OpenWrt this will simply restart the system under controlled
forms.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts | 4 ++--
arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts | 4 ++--
arch/arm/boot/dts/gemini/gemini-sl93512r.dts | 2 +-
arch/arm/boot/dts/gemini/gemini-sq201.dts | 2 +-
arch/arm/boot/dts/gemini/gemini-wbd111.dts | 4 ++--
arch/arm/boot/dts/gemini/gemini-wbd222.dts | 4 ++--
6 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
index 30c931415680..b4dbcf8f168e 100644
--- a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
@@ -27,10 +27,10 @@ chosen {
gpio_keys {
compatible = "gpio-keys";
- button-esc {
+ button-reset {
debounce-interval = <100>;
wakeup-source;
- linux,code = <KEY_ESC>;
+ linux,code = <KEY_RESTART>;
label = "reset";
/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
index 138c47e1ac1b..8c54d3a5a721 100644
--- a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
@@ -33,10 +33,10 @@ chosen {
gpio_keys {
compatible = "gpio-keys";
- button-esc {
+ button-reset {
debounce-interval = <100>;
wakeup-source;
- linux,code = <KEY_ESC>;
+ linux,code = <KEY_RESTART>;
label = "reset";
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
index 91c19e8ebfe8..be06a3815e3a 100644
--- a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
@@ -43,7 +43,7 @@ button-wps {
button-setup {
debounce-interval = <50>;
wakeup-source;
- linux,code = <KEY_SETUP>;
+ linux,code = <KEY_RESTART>;
label = "factory reset";
/* Conflict with NAND flash */
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/gemini/gemini-sq201.dts b/arch/arm/boot/dts/gemini/gemini-sq201.dts
index d0efd76695da..05ef8b80f104 100644
--- a/arch/arm/boot/dts/gemini/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
@@ -30,7 +30,7 @@ gpio_keys {
button-setup {
debounce-interval = <100>;
wakeup-source;
- linux,code = <KEY_SETUP>;
+ linux,code = <KEY_RESTART>;
label = "factory reset";
/* Conflict with NAND flash */
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd111.dts b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
index d4038930c70f..6a0c89e0c918 100644
--- a/arch/arm/boot/dts/gemini/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
@@ -28,10 +28,10 @@ chosen {
gpio_keys {
compatible = "gpio-keys";
- button-setup {
+ button-reset {
debounce-interval = <100>;
wakeup-source;
- linux,code = <KEY_SETUP>;
+ linux,code = <KEY_RESTART>;
label = "reset";
/* Conflict with ICE */
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd222.dts b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
index a503bcff5f4a..d8b34ebad4b0 100644
--- a/arch/arm/boot/dts/gemini/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
@@ -27,10 +27,10 @@ chosen {
gpio_keys {
compatible = "gpio-keys";
- button-setup {
+ button-reset {
debounce-interval = <100>;
wakeup-source;
- linux,code = <KEY_SETUP>;
+ linux,code = <KEY_RESTART>;
label = "reset";
/* Conflict with ICE */
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
--
2.34.1
More information about the linux-arm-kernel
mailing list