[PATCH v1 03/14] dt-bindings: sound: fsl,imx-asrc: convert to YAML
Sebastian Reichel
sre at kernel.org
Fri Feb 9 17:18:07 PST 2024
Convert the i.MX ASRC DT binding to YAML.
Signed-off-by: Sebastian Reichel <sre at kernel.org>
---
.../devicetree/bindings/sound/fsl,asrc.txt | 80 ---------
.../bindings/sound/fsl,imx-asrc.yaml | 159 ++++++++++++++++++
2 files changed, 159 insertions(+), 80 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/fsl,asrc.txt
create mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
deleted file mode 100644
index 998b4c8a7f78..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Freescale Asynchronous Sample Rate Converter (ASRC) Controller
-
-The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
-signal associated with an input clock into a signal associated with a different
-output clock. The driver currently works as a Front End of DPCM with other Back
-Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
-three substreams within totally 10 channels.
-
-Required properties:
-
- - compatible : Compatible list, should contain one of the following
- compatibles:
- "fsl,imx35-asrc",
- "fsl,imx53-asrc",
- "fsl,imx8qm-asrc",
- "fsl,imx8qxp-asrc",
-
- - reg : Offset and length of the register set for the device.
-
- - interrupts : Contains the spdif interrupt.
-
- - dmas : Generic dma devicetree binding as described in
- Documentation/devicetree/bindings/dma/dma.txt.
-
- - dma-names : Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
-
- - clocks : Contains an entry for each entry in clock-names.
-
- - clock-names : Contains the following entries
- "mem" Peripheral access clock to access registers.
- "ipg" Peripheral clock to driver module.
- "asrck_<0-f>" Clock sources for input and output clock.
- "spba" The spba clock is required when ASRC is placed as a
- bus slave of the Shared Peripheral Bus and when two
- or more bus masters (CPU, DMA or DSP) try to access
- it. This property is optional depending on the SoC
- design.
-
- - fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends.
-
- - fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends.
-
- - fsl,asrc-clk-map : Defines clock map used in driver. which is required
- by imx8qm/imx8qxp platform
- <0> - select the map for asrc0 in imx8qm/imx8qxp
- <1> - select the map for asrc1 in imx8qm/imx8qxp
-
-Optional properties:
-
- - big-endian : If this property is absent, the little endian mode
- will be in use as default. Otherwise, the big endian
- mode will be in use for all the device registers.
-
- - fsl,asrc-format : Defines a mutual sample format used by DPCM Back
- Ends, which can replace the fsl,asrc-width.
- The value is 2 (S16_LE), or 6 (S24_LE).
-
-Example:
-
-asrc: asrc at 2034000 {
- compatible = "fsl,imx53-asrc";
- reg = <0x02034000 0x4000>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 107>, <&clks 107>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks 107>, <&clks 0>, <&clks 0>;
- clock-names = "mem", "ipg", "asrck0",
- "asrck_1", "asrck_2", "asrck_3", "asrck_4",
- "asrck_5", "asrck_6", "asrck_7", "asrck_8",
- "asrck_9", "asrck_a", "asrck_b", "asrck_c",
- "asrck_d", "asrck_e", "asrck_f";
- dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
- <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
- dma-names = "rxa", "rxb", "rxc",
- "txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
- fsl,asrc-width = <16>;
-};
diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
new file mode 100644
index 000000000000..bc1607ecf345
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+description:
+ The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of
+ a signal associated with an input clock into a signal associated with a
+ different output clock. The driver currently works as a Front End of DPCM
+ with other Back Ends Audio controller such as ESAI, SSI and SAI. It has
+ three pairs to support three substreams within totally 10 channels.
+
+maintainers:
+ - Shawn Guo <shawnguo at kernel.org>
+ - Sascha Hauer <s.hauer at pengutronix.de>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx35-asrc
+ - fsl,imx53-asrc
+ - fsl,imx8qm-asrc
+ - fsl,imx8qxp-asrc
+ - items:
+ - enum:
+ - fsl,imx6sx-asrc
+ - fsl,imx6ul-asrc
+ - const: fsl,imx53-asrc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ maxItems: 6
+
+ dma-names:
+ items:
+ - const: rxa
+ - const: rxb
+ - const: rxc
+ - const: txa
+ - const: txb
+ - const: txc
+
+ clocks:
+ maxItems: 19
+
+ clock-names:
+ items:
+ - const: mem
+ - const: ipg
+ - const: asrck_0
+ - const: asrck_1
+ - const: asrck_2
+ - const: asrck_3
+ - const: asrck_4
+ - const: asrck_5
+ - const: asrck_6
+ - const: asrck_7
+ - const: asrck_8
+ - const: asrck_9
+ - const: asrck_a
+ - const: asrck_b
+ - const: asrck_c
+ - const: asrck_d
+ - const: asrck_e
+ - const: asrck_f
+ - const: spba
+
+ fsl,asrc-rate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The mutual sample rate used by DPCM Back Ends
+
+ fsl,asrc-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The mutual sample width used by DPCM Back Ends
+
+ fsl,asrc-clk-map:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Defines clock map used in driver
+ <0> - select the map for asrc0 in imx8qm/imx8qxp
+ <1> - select the map for asrc1 in imx8qm/imx8qxp
+
+ big-endian:
+ type: boolean
+ description:
+ If this property is absent, the little endian mode will be in use as
+ default. Otherwise, the big endian mode will be in use for all the
+ device registers.
+
+ fsl,asrc-format:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Defines a mutual sample format used by DPCM Back Ends, which can
+ replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - dmas
+ - dma-names
+ - clocks
+ - clock-names
+ - fsl,asrc-rate
+ - fsl,asrc-width
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-asrc
+ - fsl,imx8qxp-asrc
+ then:
+ required:
+ - fsl,asrc-clk-map
+ else:
+ properties:
+ fsl,asrc-clk-map: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+ asrc: asrc at 2034000 {
+ compatible = "fsl,imx53-asrc";
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+ <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+ <&clks IMX6QDL_CLK_SPBA>;
+ clock-names = "mem", "ipg", "asrck_0",
+ "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+ "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+ "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+ "asrck_d", "asrck_e", "asrck_f", "spba";
+ dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+ dma-names = "rxa", "rxb", "rxc",
+ "txa", "txb", "txc";
+ fsl,asrc-rate = <48000>;
+ fsl,asrc-width = <16>;
+ };
--
2.43.0
More information about the linux-arm-kernel
mailing list