[PATCH v2 1/2] arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number

[Romain Naour]

The tps659413 node set WKUP_GPIO0_83 (AA37) pin as input to be used as
PMIC interrupt but uses 39 (WKUP_GPIO0_39) as "interrupts" property.

Replace 39 by 83 after checking in the board schematic [1].

[1] https://www.ti.com/tool/SK-AM69

Fixes: 865a1593bf99 ("arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC")
Cc: Neha Malcom Francis <n-francis at ti.com>
Signed-off-by: Romain Naour <romain.naour at smile.fr>
---
 arch/arm64/boot/dts/ti/k3-am69-sk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 8da591579868..95c9d3da59d3 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -646,7 +646,7 @@ tps659413: pmic at 48 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins_default>;
 		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <83 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ti,primary-pmic;
-- 
2.43.0