[PATCH 2/2] arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number

[Romain Naour]

The tps659413 node set WKUP_GPIO0_7 (G28) pin as input to be used as
PMIC interrupt but uses 9 (WKUP_GPIO0_9) as "interrupts" property.

Replace 9 by 7 after checking in the board schematic [1].

[1] https://www.ti.com/tool/SK-TDA4VM

Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs")
Cc: Neha Malcom Francis <n-francis at ti.com>
Signed-off-by: Romain Naour <romain.naour at smile.fr>
---
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 188dfe291a32..6a8866055f77 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -574,7 +574,7 @@ tps659413: pmic at 48 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins_default>;
 		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ti,primary-pmic;
-- 
2.43.0