[PATCH v2 3/6] clk: sunxi-ng: nkm: Support minimum and maximum rate

[Maxime Ripard]

On Mon, Feb 05, 2024 at 04:22:26PM +0100, Frank Oltmanns wrote:
> According to the Allwinner User Manual, the Allwinner A64 requires
> PLL-MIPI to run at 500MHz-1.4GHz. Add support for that to ccu_nkm.
> 
> Signed-off-by: Frank Oltmanns <frank at oltmanns.dev>
> ---
>  drivers/clk/sunxi-ng/ccu_nkm.c | 13 +++++++++++++
>  drivers/clk/sunxi-ng/ccu_nkm.h |  2 ++
>  2 files changed, 15 insertions(+)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
> index 1168d894d636..7d135908d6e0 100644
> --- a/drivers/clk/sunxi-ng/ccu_nkm.c
> +++ b/drivers/clk/sunxi-ng/ccu_nkm.c
> @@ -181,6 +181,12 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
>  	if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
>  		rate *= nkm->fixed_post_div;
>  
> +	if (nkm->min_rate && rate < nkm->min_rate)
> +		rate = nkm->min_rate;
> +
> +	if (nkm->max_rate && rate > nkm->max_rate)
> +		rate = nkm->max_rate;
> +

This is provided by the clock range already. If you call
clk_hw_set_rate_range, it should work just fine.

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240208/e088cc28/attachment.sig>