[PATCH 4/4] spi: s3c64xx: add support for google,gs101-spi

[Tudor Ambarus]

Add support for GS101 SPI. GS101 integrates 16 SPI nodes, all with 64
bytes FIFOs. GS101 allows just 32 bit register accesses, otherwise a
Serror Interrupt is raised. Do the write reg accesses in 32 bits.

Signed-off-by: Tudor Ambarus <tudor.ambarus at linaro.org>
---
 drivers/spi/spi-s3c64xx.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index cb45ad615f3d..9ad0d513fb30 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -19,7 +19,7 @@
 #include <linux/spi/spi.h>
 #include <linux/types.h>
 
-#define MAX_SPI_PORTS		12
+#define MAX_SPI_PORTS		16
 #define S3C64XX_SPI_QUIRK_CS_AUTO	(1 << 1)
 #define AUTOSUSPEND_TIMEOUT	2000
 
@@ -1538,6 +1538,19 @@ static const struct s3c64xx_spi_port_config fsd_spi_port_config = {
 	.quirks		= S3C64XX_SPI_QUIRK_CS_AUTO,
 };
 
+static const struct s3c64xx_spi_port_config gs101_spi_port_config = {
+	.fifo_lvl_mask	= { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f,
+			    0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f},
+	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
+	.clk_div	= 4,
+	.high_speed	= true,
+	.clk_from_cmu	= true,
+	.has_loopback	= true,
+	.use_32bit_io	= true,
+	.quirks		= S3C64XX_SPI_QUIRK_CS_AUTO,
+};
+
 static const struct platform_device_id s3c64xx_spi_driver_ids[] = {
 	{
 		.name		= "s3c2443-spi",
@@ -1550,6 +1563,9 @@ static const struct platform_device_id s3c64xx_spi_driver_ids[] = {
 };
 
 static const struct of_device_id s3c64xx_spi_dt_match[] = {
+	{ .compatible = "google,gs101-spi",
+			.data = &gs101_spi_port_config,
+	},
 	{ .compatible = "samsung,s3c2443-spi",
 			.data = &s3c2443_spi_port_config,
 	},
-- 
2.43.0.594.gd9cf4e227d-goog