[PATCHv1 3/5] arm64: dts: amlogic: Add cache information to the Amlogic G12A SoCS

[Christian Hewitt]

> On 6 Feb 2024, at 11:48 am, Viacheslav <adeep at lexina.in> wrote:
> 
> You missed the AXG family with the Cortex-A53 CPU. The datasheet does not provide information on cache sizes. Given that the A113X/A113D are equipped with the Arm Cortex-A53 processor, it is assumed they use the same cache size as the S905/S905X/S905X2 models.

GXM is also missing, and also using A53 cores.

Christian

> 05/02/2024 20.19, Anand Moon wrote:
>> As per the S905X2 datasheet add missing cache information to the Amlogic
>> G12A SoC.
>> - Each Cortex-A53 core has 32KB of L1 instruction cache available and
>> 32KB of L1 data cache available.
>> - Along with 512KB Unified L2 cache.
>> To improve system performance.
>> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
>> ---
>> No public dataheet available, since S905X2 support Arm Cortex-A53 cpu
>> nence used the same cache size as S905 and S905X.
>> ---
>>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 27 +++++++++++++++++++++
>>  1 file changed, 27 insertions(+)
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> index 543e70669df5..6e1e3a3f5f18 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> @@ -17,6 +17,12 @@ cpu0: cpu at 0 {
>>   compatible = "arm,cortex-a53";
>>   reg = <0x0 0x0>;
>>   enable-method = "psci";
>> + d-cache-line-size = <32>;
>> + d-cache-size = <0x8000>;
>> + d-cache-sets = <32>;
>> + i-cache-line-size = <32>;
>> + i-cache-size = <0x8000>;
>> + i-cache-sets = <32>;
>>   next-level-cache = <&l2>;
>>   #cooling-cells = <2>;
>>   };
>> @@ -26,6 +32,12 @@ cpu1: cpu at 1 {
>>   compatible = "arm,cortex-a53";
>>   reg = <0x0 0x1>;
>>   enable-method = "psci";
>> + d-cache-line-size = <32>;
>> + d-cache-size = <0x8000>;
>> + d-cache-sets = <32>;
>> + i-cache-line-size = <32>;
>> + i-cache-size = <0x8000>;
>> + i-cache-sets = <32>;
>>   next-level-cache = <&l2>;
>>   #cooling-cells = <2>;
>>   };
>> @@ -35,6 +47,12 @@ cpu2: cpu at 2 {
>>   compatible = "arm,cortex-a53";
>>   reg = <0x0 0x2>;
>>   enable-method = "psci";
>> + d-cache-line-size = <32>;
>> + d-cache-size = <0x8000>;
>> + d-cache-sets = <32>;
>> + i-cache-line-size = <32>;
>> + i-cache-size = <0x8000>;
>> + i-cache-sets = <32>;
>>   next-level-cache = <&l2>;
>>   #cooling-cells = <2>;
>>   };
>> @@ -44,6 +62,12 @@ cpu3: cpu at 3 {
>>   compatible = "arm,cortex-a53";
>>   reg = <0x0 0x3>;
>>   enable-method = "psci";
>> + d-cache-line-size = <32>;
>> + d-cache-size = <0x8000>;
>> + d-cache-sets = <32>;
>> + i-cache-line-size = <32>;
>> + i-cache-size = <0x8000>;
>> + i-cache-sets = <32>;
>>   next-level-cache = <&l2>;
>>   #cooling-cells = <2>;
>>   };
>> @@ -52,6 +76,9 @@ l2: l2-cache0 {
>>   compatible = "cache";
>>   cache-level = <2>;
>>   cache-unified;
>> + cache-size = <0x7d000>; /* L2. 512 KB */
>> + cache-line-size = <64>;
>> + cache-sets = <512>;
>>   };
>>   };
>>  
> 
> 
> Best regards,
> --
> Viacheslav Bocharov <adeep at lexina.in>
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic