[PATCH v3 3/3] arm64: dts: ti: k3-am642-evm: add overlay for icssg1 2nd port
MD Danish Anwar
danishanwar at ti.com
Mon Feb 5 21:15:59 PST 2024
On 05/02/24 6:27 pm, Roger Quadros wrote:
>
>
> On 02/02/2024 18:50, Anwar, Md Danish wrote:
>> On 2/2/2024 5:56 PM, Roger Quadros wrote:
>>>
>>>
>>> On 22/01/2024 13:30, MD Danish Anwar wrote:
>>>> The am642-evm doesn't allow to enable 2 x CPSW3g ports and 2 x ICSSG1 ports
>>>> all together, so base k3-am642-evm.dts enables by default 2 x CPSW3g ports
>>>> and 1 x ICSSG1 ports, but it also possible to support 1 x CPSW3g ports and
>>>> 2 x ICSSG1 ports configuration.
>>>
>>> "it is also possible"
>>>
>>> OK so there can only be 3 ethernet ports on this board. There is no "ethernet3" alias.
>>>
>>
>> Yes maximum there can be 3 ports only. By default 2 are cpsw and 1 icssg
>> but this parch introduces overlay to change the muxed port into icssg.
>>
>> By default,
>> ethernet0 = &cpsw_port1;
>> ethernet1 = &cpsw_port2;
>> ethernet2 = &icssg1_emac0;
>>
>> When this overlay is applied, it should be something like this,
>> ethernet0 = &cpsw_port1;
>> ethernet1 = &icssg1_emac0;
>> ethernet2 = &icssg1_emac1;
>>
>> Let me know if this looks ok to you. I will modify the alias accordingly.
>
> ethernet0 is ok
>
> As per schematics: icssg1_emac0 is fixed to J21A port. so I'd call this ethernet1
>
> J21B port can be switched between cpsw_port2 and icssg1_emac1. so I'd call this ethernet2
>
> This way ethernet1 definition is fixed regardless and you are only switching ethernet2
> definition.
>
So ethernet0 and ethernet1 will be fixed and only ethernet2 will change
from cpsw_port2 to icssg1_emac1 when this overlay is applied.
I have posted v4 [1] before your this reply. In v4 I have kept ethernet0
and ethernet2 fixed to cpsw_port1 and icssg1_emac0 respectively and only
ethernet1 changes from cpsw_port2 to icssg1_emac1 when this overlay is
applied. Overlay only changes ethernet1. I think this is also a valid
approach. eth0 will be fixed to cpsw and eth2 will be fixed to icssg.
eth1 will toggle between cpsw and icssg. You can have a look at v4.
Pls let me know if you are okay with this.
[1] https://lore.kernel.org/all/20240205090546.4000446-1-danishanwar@ti.com/
>>
>>>>
>>>> This patch adds overlay to support 1 x CPSW3g ports and 2 x ICSSG1 ports
>>>> configuration:
>>>> - Add label name 'mdio_mux_1' for 'mdio-mux-1' node so that the node
>>>> 'mdio-mux-1' can be disabled in the overlay using the label name.
>>>> - disable 2nd CPSW3g port
>>>> - update CPSW3g pinmuxes to not use RGMII2
>>>> - disable mdio-mux-1 and define mdio-mux-2 to route ICSSG1 MDIO to the
>>>> shared DP83869 PHY
>>>> - add and enable ICSSG1 RGMII2 pinmuxes
>>>> - enable ICSSG1 MII1 port
>>>>
>>>> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
>>>> ---
>>>> arch/arm64/boot/dts/ti/Makefile | 5 ++
>>>> .../dts/ti/k3-am642-evm-icssg1-dualemac.dtso | 75 +++++++++++++++++++
>>>> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 +-
>>>> 3 files changed, 81 insertions(+), 1 deletion(-)
>>>> create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso
>>>>
>>>> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
>>>> index 52c1dc910308..320b2fae5730 100644
>>>> --- a/arch/arm64/boot/dts/ti/Makefile
>>>> +++ b/arch/arm64/boot/dts/ti/Makefile
>>>> @@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
>>>> dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
>>>> dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
>>>> dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
>>>> +dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
>>>>
>>>> # Boards with AM65x SoC
>>>> k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
>>>> @@ -105,6 +106,8 @@ k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
>>>> k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
>>>> k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
>>>> k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
>>>> +k3-am642-evm-icssg1-dualemac-dtbs := \
>>>> + k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
>>>> k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
>>>> k3-j721e-evm-pcie0-ep.dtbo
>>>> k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
>>>> @@ -120,6 +123,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
>>>> k3-am62a7-sk-csi2-ov5640.dtb \
>>>> k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
>>>> k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
>>>> + k3-am642-evm-icssg1-dualemac.dtb \
>>>> k3-j721e-evm-pcie0-ep.dtb \
>>>> k3-j721s2-evm-pcie1-ep.dtb
>>>>
>>>> @@ -129,6 +133,7 @@ DTC_FLAGS_k3-am625-sk += -@
>>>> DTC_FLAGS_k3-am62-lp-sk += -@
>>>> DTC_FLAGS_k3-am62a7-sk += -@
>>>> DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
>>>> +DTC_FLAGS_k3-am642-evm += -@
>>>> DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
>>>> DTC_FLAGS_k3-j721e-common-proc-board += -@
>>>> DTC_FLAGS_k3-j721s2-common-proc-board += -@
>>>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso
>>>> new file mode 100644
>>>> index 000000000000..b2b1a6252e73
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso
>>>> @@ -0,0 +1,75 @@
>>>> +// SPDX-License-Identifier: GPL-2.0
>>>
>>> Don't you need to use updated licensing header like in the series [1]
>>>
>>> [1] https://lore.kernel.org/all/20240110140903.4090946-1-nm@ti.com/
>>>
>>
>> Sure. I will update the header.
>>
>>>> +/**
>>>> + * DT overlay for enabling 2nd ICSSG1 port on AM642 EVM
>>>> + *
>>>> + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +/plugin/;
>>>> +
>>>> +#include <dt-bindings/gpio/gpio.h>
>>>> +#include "k3-pinctrl.h"
>>>> +
>>>> +&{/} {
>>>
>>> You need to fixup alias for ethernet1 to icssg1_emac1?
>>>
>>
>> Yes I will update the aliases accordingly.
>>
>>>> + mdio-mux-2 {
>>>
>>> this should be mdio-mux at 0 ?
>>>
>>
>> The main mux in evm dts is defined as mdio-mux-1 so I was following the
>> same. I will change this to mdio-mux at 0
>>
>>>> + compatible = "mdio-mux-multiplexer";
>>>> + mux-controls = <&mdio_mux>;
>>>> + mdio-parent-bus = <&icssg1_mdio>;
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
>>>> + mdio at 0 {
>>>> + reg = <0x0>;
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
>>>> + icssg1_phy2: ethernet-phy at 3 {
>>>> + reg = <3>;
>>>> + tx-internal-delay-ps = <250>;
>>>> + rx-internal-delay-ps = <2000>;
>>>> + };
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> +&main_pmx0 {
>>>> + icssg1_rgmii2_pins_default: icssg1-rgmii2-default-pins {
>>>> + pinctrl-single,pins = <
>>>> + AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
>>>> + AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
>>>> + AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
>>>> + AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
>>>> + AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
>>>> + AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
>>>> + AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
>>>> + AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
>>>> + AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
>>>> + AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
>>>> + AM64X_IOPAD(0x0148, PIN_OUTPUT, 2) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
>>>> + AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
>>>> + >;
>>>> + };
>>>> +};
>>>> +
>>>> +&cpsw3g {
>>>> + pinctrl-0 = <&rgmii1_pins_default>;
>>>> +};
>>>> +
>>>> +&cpsw_port2 {
>>>> + status = "disabled";
>>>> +};
>>>> +
>>>> +&mdio_mux_1 {
>>>> + status = "disabled";
>>>> +};
>>>> +
>>>> +&icssg1_eth {
>>>> + pinctrl-0 = <&icssg1_rgmii1_pins_default>, <&icssg1_rgmii2_pins_default>;
>>>> +};
>>>> +
>>>> +&icssg1_emac1 {
>>>> + status = "okay";
>>>> + phy-handle = <&icssg1_phy2>;
>>>> + phy-mode = "rgmii-id";
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
>>>> index c08b0223be52..6ae43c12419f 100644
>>>> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
>>>> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
>>>> @@ -200,7 +200,7 @@ mdio_mux: mux-controller {
>>>> mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>;
>>>> };
>>>>
>>>> - mdio-mux-1 {
>>>> + mdio_mux_1: mdio-mux-1 {
>>>
>>> mdio_mux_1: mdio-mux at 1
>>>
>>
>> Sure. I will update this.
>>
>>>> compatible = "mdio-mux-multiplexer";
>>>> mux-controls = <&mdio_mux>;
>>>> mdio-parent-bus = <&cpsw3g_mdio>;
>>>
>>
>
--
Thanks and Regards,
Danish
More information about the linux-arm-kernel
mailing list