[PATCH] dt-bindings: ata: atmel: remove at91 compact flash documentation

[Nicolas Ferre]

On 05/02/2024 at 11:52, Hari Prasath G E - I63539 wrote:
> The compatible "at91rm9200-cf" is not used by any driver,hence remove the
> corresponding documentation.
> 
> Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE at microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre at microchip.com>

> ---
>   .../devicetree/bindings/ata/atmel-at91_cf.txt | 19 -------------------
>   1 file changed, 19 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
> 
> diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
> deleted file mode 100644
> index c1d22b3ae134..000000000000
> --- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -Atmel AT91RM9200 CompactFlash
> -
> -Required properties:
> -- compatible : "atmel,at91rm9200-cf".
> -- reg : should specify localbus address and size used.
> -- gpios : specifies the gpio pins to control the CF device. Detect
> -  and reset gpio's are mandatory while irq and vcc gpio's are
> -  optional and may be set to 0 if not present.
> -
> -Example:
> -compact-flash at 50000000 {
> -	compatible = "atmel,at91rm9200-cf";
> -	reg = <0x50000000 0x30000000>;
> -	gpios = <&pioC 13 0	/* irq */
> -		 &pioC 15 0 	/* detect */
> -		 0		/* vcc */
> -		 &pioC  5 0	/* reset */
> -		>;
> -};