[PATCH] ARM: dts: imx6ull-dhcor: Remove 900MHz operating point

[Shawn Guo]

On Thu, Dec 21, 2023 at 05:46:33PM +0100, Christoph Niedermaier wrote:
> Due to CPU lifetime consideration of the SoC manufacturer [1] and
> the preferred area of operation in the industrial related
> environment, set the maximum frequency for each DHCOM i.MX6ULL to
> 792MHz, as with the industrial type. This is done by removing the
> operating point at 900MHz and set the clock-frequency to 792000000.
> 
> [1] https://www.nxp.com/docs/en/application-note/AN5337.pdf
> 
> Signed-off-by: Christoph Niedermaier <cniedermaier at dh-electronics.com>

Applied, thanks!