[PATCH] pwm: atmel: Don't use pwm consumer API

[claudiu beznea]

On 29.01.2024 10:56, Uwe Kleine-König wrote:
> Lowlevel driver callbacks are not supposed to use the consumer API
> functions. Currently this works, but with the upcoming locking changes
> this probably results in dead locks.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>

Reviewed-by: Claudiu Beznea <claudiu.beznea at tuxon.dev>

> ---
>  drivers/pwm/pwm-atmel.c | 13 +++++--------
>  1 file changed, 5 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
> index 47bcc8a3bf9d..26573829e391 100644
> --- a/drivers/pwm/pwm-atmel.c
> +++ b/drivers/pwm/pwm-atmel.c
> @@ -294,19 +294,16 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>  			   const struct pwm_state *state)
>  {
>  	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
> -	struct pwm_state cstate;
>  	unsigned long cprd, cdty;
>  	u32 pres, val;
>  	int ret;
>  
> -	pwm_get_state(pwm, &cstate);
> -
>  	if (state->enabled) {
>  		unsigned long clkrate = clk_get_rate(atmel_pwm->clk);
>  
> -		if (cstate.enabled &&
> -		    cstate.polarity == state->polarity &&
> -		    cstate.period == state->period) {
> +		if (pwm->state.enabled &&
> +		    pwm->state.polarity == state->polarity &&
> +		    pwm->state.period == state->period) {
>  			u32 cmr = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
>  
>  			cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
> @@ -328,7 +325,7 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>  
>  		atmel_pwm_calculate_cdty(state, clkrate, cprd, pres, &cdty);
>  
> -		if (cstate.enabled) {
> +		if (pwm->state.enabled) {
>  			atmel_pwm_disable(chip, pwm, false);
>  		} else {
>  			ret = clk_enable(atmel_pwm->clk);
> @@ -348,7 +345,7 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>  		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
>  		atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty);
>  		atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
> -	} else if (cstate.enabled) {
> +	} else if (pwm->state.enabled) {
>  		atmel_pwm_disable(chip, pwm, true);
>  	}
>