[PATCH v4 2/5] dt-bindings: rtc: abx80x: convert to yaml

[Rob Herring]

On Fri, 02 Feb 2024 17:10:49 +0100, Josua Mayer wrote:
> Convert the abracon abx80x rtc text bindings to dt-schema format.
> 
> In addition to the text description reference generic interrupts
> properties and add an example.
> 
> Signed-off-by: Josua Mayer <josua at solid-run.com>
> ---
>  .../devicetree/bindings/rtc/abracon,abx80x.txt     | 31 ---------
>  .../devicetree/bindings/rtc/abracon,abx80x.yaml    | 74 ++++++++++++++++++++++
>  2 files changed, 74 insertions(+), 31 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dts:28.13-26: Warning (reg_format): /example-0/rtc at 69:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/rtc/abracon,abx80x.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240202-add-am64-som-v4-2-5f8b12af5e71@solid-run.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.