[PATCH v2 1/1] spi-mxs: Fix chipselect glitch

[Ralf Schlatterbeck]

There was a change in the mxs-dma engine that uses a new custom flag.
The change was not applied to the mxs spi driver.
This results in chipselect being deasserted too early.
This fixes the chipselect problem by using the new flag in the mxs-spi
driver.

Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Ralf Schlatterbeck <rsc at runtux.com>
---
For oscilloscope screenshots and a verbose explanation see my blog post
at https://blog.runtux.com/posts/2024/02/01/
History:
Omit the line break change from patch requested by Marc Kleine-Budde
<mkl at pengutronix.de>

 drivers/spi/spi-mxs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index 1bf080339b5a..88cbe4f00cc3 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -39,6 +39,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/mxs-spi.h>
 #include <trace/events/spi.h>
+#include <linux/dma/mxs-dma.h>
 
 #define DRIVER_NAME		"mxs-spi"
 
@@ -252,7 +253,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi,
 		desc = dmaengine_prep_slave_sg(ssp->dmach,
 				&dma_xfer[sg_count].sg, 1,
 				(flags & TXRX_WRITE) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
-				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+				DMA_PREP_INTERRUPT | MXS_DMA_CTRL_WAIT4END);
 
 		if (!desc) {
 			dev_err(ssp->dev,
-- 
2.20.1

-- 
Dr. Ralf Schlatterbeck                  Tel:   +43/2243/26465-16
Open Source Consulting                  www:   www.runtux.com
Reichergasse 131, A-3411 Weidling       email: office at runtux.com