[PATCH v3 0/3] Add AM64x ICSSG Ethernet support

[Ravi Gunasekaran]

On 1/22/2024 5:00 PM, MD Danish Anwar wrote:
> Hi All,
>
> This series adds support for ICSSG ethernet on AM64x. 
> This series is based on the latest next-20231211 linux-next.
>
> AM64x EVM has three ethernet ports. One is dedicated to CPSW and one is
> dedicated to ICSSG1. The remaining port is muxed between CPSW and ICSSG1
> ICSSG1 ports. The ICSSG1 node is added in the k3-am642-evm.dts. By default
> the muxed port is used by CPSW so 2nd ICSSG1 port is disabled in the
> k3-am642-evm.dts. But overlay k3-am642-evm-icssg1-dualemac.dtso can be
> applied to use muxed port as ICSSG1.
>
> This is the v3 of the series [v1].
>
> Changes from v2 to v3:
> *) No functional changes.
> *) Rebased on latest linux-next (next-20240122) after 6.8-rc1.
>
> Changes from v1 to v2:
> *) Fixed aliases section in k3-am642-evm.dts
> *) Fixed firmware-names in k3-am642-evm.dts
> *) Changed icssg1_phy1 to ethernet-phy at f from ethernet-phy at 0 as suggested
>    by Andrew L.
> *) Changed makefile to handle overlays using CONFIG_OF_ALL_DTBS as
>    suggested by Nishant and Andrew Davis.
> *) Fixed aliases section in k3-am642-evm-icssg1-dualemac.dtso
> *) Fixed pinctrl in k3-am642-evm-icssg1-dualemac.dtso
> *) Updated commit message of patch 3/3 of the series to warn about adding
>    label name to 'mdio-mux-1' node.
>
> [v1] https://lore.kernel.org/all/20231207081917.340167-1-danishanwar@ti.com/
> [v2] https://lore.kernel.org/all/20231212165832.3933335-1-danishanwar@ti.com/
>

For the series,
Reviewed-by: Ravi Gunasekaran <r-gunasekaran at ti.com>