[PATCH net-next v4 08/11] stmmac: intel: configure SerDes according to the interface mode

[Choong Yong Liang]

On 31/1/2024 6:58 pm, Ilpo Järvinen wrote:
> On Mon, 29 Jan 2024, Choong Yong Liang wrote:
> 
>> From: "Tan, Tee Min" <tee.min.tan at linux.intel.com>
>>
>> Intel platform will configure the SerDes through PMC api based on the
>> provided interface mode.
>>
>> This patch adds several new functions below:-
>> - intel_tsn_interface_is_available(): This new function reads FIA lane
>>    ownership registers and common lane registers through IPC commands
>>    to know which lane the mGbE port is assigned to.
>> - intel_config_serdes(): To configure the SerDes based on the assigned
>>    lane and latest interface mode, it sends IPC command to the PMC through
>>    PMC driver/API. The PMC acts as a proxy for R/W on behalf of the driver.
>> - intel_set_reg_access(): Set the register access to the available TSN
>>    interface.
>>
>> Signed-off-by: Tan, Tee Min <tee.min.tan at linux.intel.com>
>> Signed-off-by: Choong Yong Liang <yong.liang.choong at linux.intel.com>
>> ---
>>   drivers/net/ethernet/stmicro/stmmac/Kconfig   |   1 +
>>   .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 113 +++++++++++++++++-
>>   .../net/ethernet/stmicro/stmmac/dwmac-intel.h |  75 ++++++++++++
>>   3 files changed, 188 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
>> index 85dcda51df05..be423fb2b46c 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
>> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
>> @@ -273,6 +273,7 @@ config DWMAC_INTEL
>>   	default X86
>>   	depends on X86 && STMMAC_ETH && PCI
>>   	depends on COMMON_CLK
>> +	select INTEL_PMC_IPC
> 
> INTEL_PMC_IPC has depends on ACPI but selecting INTEL_PMC_IPC won't
> enforce it AFAIK.
> 
Hi Ilpo,

Thank you for pointing this out.
I will check on my side too.
Will fix it in the new patch series.