[PATCH 2/2] arm64: dts: renesas: gray-hawk-single: Add I2C0 and EEPROMs

[Geert Uytterhoeven]

Enable the I2C0 bus on the Gray Hawk Single board, and describe the I2C
EEPROMs present.

Based on patches for Gray Hawk in the BSP by Hai Pham.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
The Gray Hawk Single documentation does not mention the purpose of the
I2C EEPROMs, but the schematics label the last two as "Board ID".
The labels match the corresponding EEPROMs on the White Hawk CPU and
BreakOut board stack, from which the Gray Hawk Single board is derived.
---
 .../dts/renesas/r8a779h0-gray-hawk-single.dts | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
index 1c84fe7171d3fd85..1bee27b2284d2eee 100644
--- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
@@ -50,6 +50,42 @@ &hscif0 {
 	status = "okay";
 };
 
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom at 50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+
+	eeprom at 51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+
+	eeprom at 52 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "csi-dsi-sub-board-id";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+
+	eeprom at 53 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "ethernet-sub-board-id";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
+
 &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
@@ -59,6 +95,11 @@ hscif0_pins: hscif0 {
 		function = "hscif0";
 	};
 
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
 	scif_clk_pins: scif_clk {
 		groups = "scif_clk";
 		function = "scif_clk";
-- 
2.34.1