[PATCH] ARM: dts: amlogic: meson: remove size and address cells from USB nodes

[Martin Blumenstingl]

The only board that actually requires these properties is
meson8b-odroidc1.dts but that already sets it on it's own. Drop these
properties from meson.dtsi because otherwise they can cause dtc
warnings:
  /soc/usb at c9040000: unnecessary #address-cells/#size-cells without
  "ranges", "dma-ranges" or child "reg" property

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 arch/arm/boot/dts/amlogic/meson.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/amlogic/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
index 8cb0fc78b2af..28ec2c821cdc 100644
--- a/arch/arm/boot/dts/amlogic/meson.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -255,8 +255,6 @@ rtc: rtc at 740 {
 
 		usb0: usb at c9040000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc9040000 0x40000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb0_phy>;
@@ -270,8 +268,6 @@ usb0: usb at c9040000 {
 
 		usb1: usb at c90c0000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc90c0000 0x40000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb1_phy>;
-- 
2.47.1