[PATCH v3 3/3] arm64: dts: imx93: Use IMX93_CLK_SPDIF_IPG as SPDIF IPG clock

[Abel Vesa]

On 24-12-09 20:37:31, Shawn Guo wrote:
> On Tue, Nov 19, 2024 at 09:58:05AM +0800, Shengjiu Wang wrote:
> > IMX93_CLK_BUS_WAKEUP is not accurate IPG clock, which
> > missed the clock gate part.
> > 
> > IMX93_CLK_SPDIF_IPG is the correct clock.
> > 
> > Fixes: 1c4a4f7362fd ("arm64: dts: imx93: Add audio device nodes")
> > Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> > Reviewed-by: Frank Li <Frank.Li at nxp.com>
> 
> Hi Abel,
> 

Hi Shawn,

> I guess it would be the best for you to apply the whole series through
> clock tree?  In that case:

Sure, will take this whole series through my tree.

> 
> Acked-by: Shawn Guo <shawnguo at kernel.org>
> 

Thanks,
Abel

> Thanks,
> Shawn
> 
> > ---
> >  arch/arm64/boot/dts/freescale/imx93.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> > index 688488de8cd2..56766fdb0b1e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> > @@ -925,7 +925,7 @@ xcvr: xcvr at 42680000 {
> >  				reg-names = "ram", "regs", "rxfifo", "txfifo";
> >  				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
> >  					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
> > -				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
> > +				clocks = <&clk IMX93_CLK_SPDIF_IPG>,
> >  					 <&clk IMX93_CLK_SPDIF_GATE>,
> >  					 <&clk IMX93_CLK_DUMMY>,
> >  					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
> > -- 
> > 2.34.1
> > 
>