[PATCH v2] selftests: arm coresight: sysfsmode testing

[James Clark]

On 19/12/2024 2:24 pm, Linu Cherian wrote:
> Add sysfs mode selftest for ARM Coresight hardware tracer.
> 
> The test will run below sequence for all possible sinks for every
> trace source available on the system.
> 1. Enable source and sink device to start tracing in sysfs mode
> 3. Run a standard dd command to be traced
> 4. Stop tracing
> 5. Readback tracedata
> 
> - Test case is pass if the readback of tracedata is success else
> failure.
> - In case of ETR sink, the test is run with both default buffer mode and
> reserved buffer mode(if available).
> 
> Sample output:
> 
>   selftests: drivers/hwtracing/coresight: sysfs_test_trace.sh
>   Running sysfs trace with default settings
>   64+0 records in
>   64+0 records out
>   67108864 bytes (67 MB, 64 MiB) copied, 0.196945 s, 341 MB/s
>   32+0 records in
>   32+0 records out
>   16384 bytes (16 kB, 16 KiB) copied, 0.000805288 s, 20.3 MB/s
>   CoreSight path testing (CPU0 -> tmc_etf0): PASS
> 
> Signed-off-by: Linu Cherian <lcherian at marvell.com>
> ---
> Changelog from v1:
> - Added test description in commit message suggested by Shuah
> - Added config dependency file suggested by Shuah
> - Added TARGETS as suggested by James
> - Skipped TPIU as suggested by James
> - Added Reviewed-by tag
> 
> 
>   tools/testing/selftests/Makefile              |   1 +
>   .../drivers/hwtracing/coresight/Makefile      |   5 +
>   .../drivers/hwtracing/coresight/config        |   7 +
>   .../hwtracing/coresight/sysfs_test_trace.sh   | 146 ++++++++++++++++++
>   4 files changed, 159 insertions(+)
>   create mode 100644 tools/testing/selftests/drivers/hwtracing/coresight/Makefile
>   create mode 100644 tools/testing/selftests/drivers/hwtracing/coresight/config
>   create mode 100755 tools/testing/selftests/drivers/hwtracing/coresight/sysfs_test_trace.sh
> 

Reviewed-by: James Clark <james.clark at linaro.org>