[PATCH v2 6/9] arm64: defconfig: enable STM32 timers drivers

Fabrice Gasnier fabrice.gasnier at foss.st.com
Fri Dec 20 01:59:24 PST 2024


Enable the STM32 timer drivers: MFD, counter, PWM and trigger as module.
These drivers can be used on STM32MP25.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
---
 arch/arm64/configs/defconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c62831e61586..d6aabdc103d7 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -764,6 +764,7 @@ CONFIG_MFD_TI_LP873X=m
 CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TPS6594_I2C=m
 CONFIG_MFD_ROHM_BD718XX=y
+CONFIG_MFD_STM32_TIMERS=m
 CONFIG_MFD_WCD934X=m
 CONFIG_MFD_KHADAS_MCU=m
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -1499,6 +1500,7 @@ CONFIG_IIO_CROS_EC_LIGHT_PROX=m
 CONFIG_SENSORS_ISL29018=m
 CONFIG_VCNL4000=m
 CONFIG_IIO_ST_MAGN_3AXIS=m
+CONFIG_IIO_STM32_TIMER_TRIGGER=m
 CONFIG_IIO_CROS_EC_BARO=m
 CONFIG_MPL3115=m
 CONFIG_PWM=y
@@ -1516,6 +1518,7 @@ CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_RZ_MTU3=m
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_SL28CPLD=m
+CONFIG_PWM_STM32=m
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
 CONFIG_PWM_TIECAP=m
@@ -1650,6 +1653,7 @@ CONFIG_INTERCONNECT_QCOM_SM8650=y
 CONFIG_INTERCONNECT_QCOM_X1E80100=y
 CONFIG_COUNTER=m
 CONFIG_RZ_MTU3_CNT=m
+CONFIG_STM32_TIMER_CNT=m
 CONFIG_HTE=y
 CONFIG_HTE_TEGRA194=y
 CONFIG_HTE_TEGRA194_TEST=m
-- 
2.25.1




More information about the linux-arm-kernel mailing list