[PATCH v6 5/5] arm64: dts: qcom: Update IPQ9574 xo_board_clk to use fixed factor clock

[Konrad Dybcio]

On 20.12.2024 7:43 AM, Jie Luo wrote:
> 
> 
> On 12/20/2024 5:28 AM, Konrad Dybcio wrote:
>> On 18.12.2024 12:17 PM, Jie Luo wrote:
>>>
>>>
>>> On 12/13/2024 6:30 PM, Jie Luo wrote:
>>>>
>>>>
>>>> On 12/13/2024 2:33 AM, Konrad Dybcio wrote:
>>>>> On 7.11.2024 10:50 AM, Luo Jie wrote:
>>>>>> xo_board_clk is fixed to 24 MHZ, which is routed from WiFi output clock
>>>>>> 48 MHZ (also being the reference clock of CMN PLL) divided 2 by analog
>>>>>> block routing channel.
>>>>>>
>>>>>> Signed-off-by: Luo Jie <quic_luoj at quicinc.com>
>>>>>> ---
>>>>>>    arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi | 7 ++++++-
>>>>>>    arch/arm64/boot/dts/qcom/ipq9574.dtsi            | 3 ++-
>>>>>>    2 files changed, 8 insertions(+), 2 deletions(-)
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/ arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
>>>>>> index 78f6a2e053d5..9a8692377176 100644
>>>>>> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
>>>>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
>>>>>> @@ -174,8 +174,13 @@ &ref_48mhz_clk {
>>>>>>        clock-mult = <1>;
>>>>>>    };
>>>>>> +/*
>>>>>> + * The frequency of xo_board_clk is fixed to 24 MHZ, which is routed
>>>>>> + * from WiFi output clock 48 MHZ divided by 2.
>>>>>> + */
>>>>>>    &xo_board_clk {
>>>>>> -    clock-frequency = <24000000>;
>>>>>> +    clock-div = <2>;
>>>>>> +    clock-mult = <1>;
>>>>>>    };
>>>>>>    &xo_clk {
>>>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/ dts/qcom/ipq9574.dtsi
>>>>>> index 8246a00a3e3e..25aed33e9358 100644
>>>>>> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>>>> @@ -32,7 +32,8 @@ sleep_clk: sleep-clk {
>>>>>>            };
>>>>>>            xo_board_clk: xo-board-clk {
>>>>>> -            compatible = "fixed-clock";
>>>>>> +            compatible = "fixed-factor-clock";
>>>>>> +            clocks = <&ref_48mhz_clk>;
>>>>>
>>>>> This must be squashed with the previous patch, you can't introduce
>>>>> code and replace it immediately afterwards.
>>>>>
>>>>> Konrad
>>>
>>> Hi Konrad,
>>>
>>> Looking at this comment again, there may have been some
>>> misunderstanding. We are not introducing xo_board_clk in patch 4 of this
>>> series. xo_board_clk is a pre-existing node.
>>>
>>> As part of this additional patch 5, we wanted to address Dmitry's
>>> comment earlier in v5 (reference to comment below), by converting the
>>> xo_board_clk as well to a fixed-factor clock. So it is better to keep
>>> this change as a separate patch in my view. Hope this is OK.
>>
>> Oh okay..
>>
>> What's the difference between xo_board_clk and xo_clk then, if the
>> divider is accounted for in xo_board_clk?
>>
>> Konrad
> 
> Here is the clock chain for the relationship between the clocks:
> xo_clk (48 MHZ or 96 MHZ)-->WiFi (mul/div)--> 48 MHZ-->CMN PLL
>                                |
>                            +-->fixed factor(div by 2) --> xo_board_clk (24 MHZ)
> 
> So there are two dividers (fixed factor clocks): first for generating
> the 48 MHZ clock (ref-48mhz-clk) from the fixed clock source 'xo_clk',
> and a second for generating the 24 MHZ 'xo_board_clk' from the 48 MHZ
> ref clock.

Ok, thanks for the explanation

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

Konrad