[PATCH v13 4/9] irqchip/gic-v3-its: Add DOMAIN_BUS_DEVICE_PCI_EP_MSI support
Niklas Cassel
cassel at kernel.org
Thu Dec 19 12:10:16 PST 2024
On Thu, Dec 19, 2024 at 12:02:02PM -0500, Frank Li wrote:
> On Thu, Dec 19, 2024 at 10:52:30AM +0000, Marc Zyngier wrote:
> > On Wed, 18 Dec 2024 23:08:39 +0000,
[...]
> If use latest ITS MSI64 should be simple, only need descript it at DTS
> (I have not hardware to test this case yet).
> pci-ep {
> ...
> msi-map = <0 &its, 0x<8_0000, 0xff>;
> ^, ctrl ID.
> msi-mask = <0xff>;
> ...
> }
[...]
> This solution already test by Tested-by: Niklas Cassel <cassel at kernel.org>
> who use another dwc controller, which they already implemented
> "implementation-specific" by only update dts to provide hardware
> information.(I guest he use ITS's MSI64)
>
> Because it is new patches, I have not added Niklas's test-by tag. There
> are not big functional change since Nikas test. The major change is make
> msi part better align current MSI framework according to Thomas's
> suggestion.
Frank, I tested this series (a few revisions back) on the rockchip rk3588,
which just like imx95, uses a DWC based PCIe EP controller, and ARM GIC ITS,
but unlike imx95, it does not require any additional look up table registers
to be configured.
While the rk3588 PCIe host controller node has:
msi-map = <0x0000 &its1 0x0000 0x1000>;
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi?h=v6.13-rc3#n164
The rk3588 PCIe endpoint controller node, which is the only one relevant
in this case, only has:
msi-parent = <&its1 0x0000>;
no msi-map.
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/commit/?h=v6.14-armsoc/dts64&id=b6f09f497b07008aa65c31341138cecafa78222c
Kind regards,
Niklas
More information about the linux-arm-kernel
mailing list