[PATCH v2 2/2] arm64: dts: imx95-19x19-evk: add ENETC 0 support
Frank Li
Frank.li at nxp.com
Thu Dec 19 09:50:07 PST 2024
On Thu, Dec 19, 2024 at 02:13:40PM +0800, Wei Fang wrote:
> Add ENETC 0 (1G ethernet port) support for i.MX95-19x19-EVK board. In
> addition, because all ENETC instances share MDIO bus, so enable EMDIO
> at the same time.
>
> Signed-off-by: Wei Fang <wei.fang at nxp.com>
> ---
Reviewed-by: Frank Li <Frank.Li at nxp.com>
> .../boot/dts/freescale/imx95-19x19-evk.dts | 52 +++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> index 6086cb7fa5a0..8bc066c3760c 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> @@ -22,6 +22,7 @@ / {
> compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
>
> aliases {
> + ethernet0 = &enetc_port0;
> gpio0 = &gpio1;
> gpio1 = &gpio2;
> gpio2 = &gpio3;
> @@ -193,6 +194,14 @@ sound-wm8962 {
> };
> };
>
> +&enetc_port0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enetc0>;
> + phy-handle = <ðphy0>;
> + phy-mode = "rgmii-id";
> + status = "okay";
> +};
> +
> &flexspi1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_flexspi1>;
> @@ -338,6 +347,25 @@ &mu7 {
> status = "okay";
> };
>
> +&netcmix_blk_ctrl {
> + status = "okay";
> +};
> +
> +&netc_blk_ctrl {
> + status = "okay";
> +};
> +
> +&netc_emdio {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_emdio>;
> + status = "okay";
> +
> + ethphy0: ethernet-phy at 1 {
> + reg = <1>;
> + realtek,clkout-disable;
> + };
> +};
> +
> &pcie0 {
> pinctrl-0 = <&pinctrl_pcie0>;
> pinctrl-names = "default";
> @@ -429,6 +457,30 @@ &wdog3 {
> };
>
> &scmi_iomuxc {
> + pinctrl_emdio: emdiogrp{
> + fsl,pins = <
> + IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x57e
> + IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e
> + >;
> + };
> +
> + pinctrl_enetc0: enetc0grp {
> + fsl,pins = <
> + IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x57e
> + IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x57e
> + IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x57e
> + IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x57e
> + IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e
> + IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e
> + IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e
> + IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e
> + IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e
> + IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e
> + IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e
> + IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e
> + >;
> + };
> +
> pinctrl_flexspi1: flexspi1grp {
> fsl,pins = <
> IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe
> --
> 2.34.1
>
More information about the linux-arm-kernel
mailing list