[PATCH v3 3/7] soc: mediatek: mtk-cmdq: Add pa_base parsing for unsupported subsys ID hardware

[Jason-JH.Lin]

When GCE executes instructions, the corresponding hardware register
can be found through the subsys ID. For hardware that does not support
subsys ID, its subsys ID will be set to invalid value and its physical
address needs to be used to generate GCE instructions.

This commit adds a pa_base parsing flow to the cmdq_client_reg structure
for these unsupported subsys ID hardware.

Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 18 ++++++++++++++++--
 include/linux/soc/mediatek/mtk-cmdq.h  |  3 +++
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 455221e8de24..aa9853100d78 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/mailbox_controller.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/soc/mediatek/mtk-cmdq.h>
 
 #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
@@ -60,20 +61,30 @@ int cmdq_dev_get_client_reg(struct device *dev,
 			    struct cmdq_client_reg *client_reg, int idx)
 {
 	struct of_phandle_args spec;
+	struct resource res;
 	int err;
 
 	if (!client_reg)
 		return -ENOENT;
 
+	if (of_address_to_resource(dev->of_node, 0, &res) != 0) {
+		dev_err(dev, "Missing reg in %s node\n", dev->of_node->full_name);
+		return -EINVAL;
+	}
+	client_reg->pa_base = res.start;
+
 	err = of_parse_phandle_with_fixed_args(dev->of_node,
 					       "mediatek,gce-client-reg",
 					       3, idx, &spec);
 	if (err < 0) {
-		dev_warn(dev,
+		dev_dbg(dev,
 			"error %d can't parse gce-client-reg property (%d)",
 			err, idx);
 
-		return err;
+		/* make subsys invalid */
+		client_reg->subsys = CMDQ_SUBSYS_INVALID;
+
+		return 0;
 	}
 
 	client_reg->subsys = (u8)spec.args[0];
@@ -130,6 +141,9 @@ int cmdq_pkt_create(struct cmdq_client *client, struct cmdq_pkt *pkt, size_t siz
 
 	pkt->buf_size = size;
 
+	/* need to use pkt->cl->chan later to call mbox APIs when generating instruction */
+	pkt->cl = (void *)client;
+
 	dev = client->chan->mbox->dev;
 	dma_addr = dma_map_single(dev, pkt->va_base, pkt->buf_size,
 				  DMA_TO_DEVICE);
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 0c3906e8ad19..3578cc9200e9 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -23,6 +23,8 @@
 #define CMDQ_THR_SPR_IDX2	(2)
 #define CMDQ_THR_SPR_IDX3	(3)
 
+#define CMDQ_SUBSYS_INVALID	(U8_MAX)
+
 struct cmdq_pkt;
 
 enum cmdq_logic_op {
@@ -52,6 +54,7 @@ struct cmdq_operand {
 
 struct cmdq_client_reg {
 	u8 subsys;
+	phys_addr_t pa_base;
 	u16 offset;
 	u16 size;
 };
-- 
2.43.0