[PATCH 04/10] arm64: dts: imx8mp-skov: describe HDMI display pipeline

[Ahmad Fatoum]

From: Oleksij Rempel <o.rempel at pengutronix.de>

Back when this device tree was first added, there were no i.MX8MP
HDMI bindings upstream yet. This has changed now, so let's use them
to describe the HDMI on the imx8mp-skov-revb-hdmi board.

Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 .../boot/dts/freescale/imx8mp-skov-revb-hdmi.dts      | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
index 206116be8166..32a429437cbd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
@@ -9,6 +9,21 @@ / {
 	compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c5 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c5>;
@@ -19,6 +34,10 @@ &i2c5 {
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl_hdmi: hdmigrp {
 		fsl,pins = <

-- 
2.39.5