[PATCH 08/10] arm64: dts: imx8mp-skov: describe mains fail detection

[Ahmad Fatoum]

From: Oleksij Rempel <o.rempel at pengutronix.de>

The main 24V regulator will toggle GPIO4_IO23 to signal imminent voltage
loss. Reflect this in the DT, so the OS can take appropriate action when
this happens.

Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
index bce23d62cd27..80d212acc0c3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -116,6 +116,11 @@ reg_24v: regulator-24v {
 		regulator-name = "24V";
 		regulator-min-microvolt = <24000000>;
 		regulator-max-microvolt = <24000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg24v>;
+		interrupts-extended = <&gpio4 23 IRQ_TYPE_EDGE_FALLING>;
+		system-critical-regulator;
+		regulator-uv-less-critical-window-ms = <50>;
 	};
 
 	reg_can2rs: regulator-can2rs {
@@ -591,6 +596,12 @@ MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT			0x116
 		>;
 	};
 
+	pinctrl_reg24v: reg24vgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23			0x154
+		>;
+	};
+
 	pinctrl_reg_vsd_3v3: regvsd3v3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40

-- 
2.39.5