[PATCH] iommu/tegra241-cmdqv: Read SMMU IDR1.CMDQS instead of hardcoding
Nicolin Chen
nicolinc at nvidia.com
Wed Dec 18 21:14:21 PST 2024
The hardware limitation "max=19" actually comes from SMMU Command Queue.
So, it'd be more natural for tegra241-cmdqv driver to read it out rather
than hardcoding it itself.
This is not an issue yet for a kernel on a baremetal system, but a guest
kernel setting the queue base/size in form of IPA/gPA might result in a
noncontiguous queue in the physical address space, if underlying physical
pages backing up the guest RAM aren't contiguous entirely: e.g. 2MB-page
backed guest RAM cannot guarantee a contiguous queue if it is 8MB (capped
to VCMDQ_LOG2SIZE_MAX=19). This might lead to command errors when HW does
linear-read from a noncontiguous queue memory.
Adding this extra IDR1.CMDQS cap (in the guest kernel) allows VMM to set
SMMU's IDR1.CMDQS=17 for the case mentioned above, so a guest-level queue
will be capped to maximum 2MB, ensuring a contiguous queue memory.
Fixes: a3799717b881 ("iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift")
Reported-by: Ian Kalinowski <ikalinowski at nvidia.com>
Cc: <stable at vger.kernel.org>
Signed-off-by: Nicolin Chen <nicolinc at nvidia.com>
---
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c b/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c
index 6e41ddaa24d6..d525ab43a4ae 100644
--- a/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c
+++ b/drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c
@@ -79,7 +79,6 @@
#define TEGRA241_VCMDQ_PAGE1(q) (TEGRA241_VCMDQ_PAGE1_BASE + 0x80*(q))
#define VCMDQ_ADDR GENMASK(47, 5)
#define VCMDQ_LOG2SIZE GENMASK(4, 0)
-#define VCMDQ_LOG2SIZE_MAX 19
#define TEGRA241_VCMDQ_BASE 0x00000
#define TEGRA241_VCMDQ_CONS_INDX_BASE 0x00008
@@ -505,12 +504,15 @@ static int tegra241_vcmdq_alloc_smmu_cmdq(struct tegra241_vcmdq *vcmdq)
struct arm_smmu_cmdq *cmdq = &vcmdq->cmdq;
struct arm_smmu_queue *q = &cmdq->q;
char name[16];
+ u32 regval;
int ret;
snprintf(name, 16, "vcmdq%u", vcmdq->idx);
- /* Queue size, capped to ensure natural alignment */
- q->llq.max_n_shift = min_t(u32, CMDQ_MAX_SZ_SHIFT, VCMDQ_LOG2SIZE_MAX);
+ /* Cap queue size to SMMU's IDR1.CMDQS and ensure natural alignment */
+ regval = readl_relaxed(smmu->base + ARM_SMMU_IDR1);
+ q->llq.max_n_shift =
+ min_t(u32, CMDQ_MAX_SZ_SHIFT, FIELD_GET(IDR1_CMDQS, regval));
/* Use the common helper to init the VCMDQ, and then... */
ret = arm_smmu_init_one_queue(smmu, q, vcmdq->page0,
--
2.43.0
More information about the linux-arm-kernel
mailing list