[PATCH v3 07/33] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2

[Krzysztof Kozlowski]

On Tue, Dec 17, 2024 at 04:43:19PM +0100, AngeloGioacchino Del Regno wrote:
> +  i2c:
> +    type: object
> +    $ref: /schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
> +    unevaluatedProperties: false
> +    description: HDMI DDC I2C controller
> +
> +  phys:
> +    maxItems: 1
> +    description: PHY providing clocking TMDS and pixel to controller
> +
> +  phy-names:
> +    items:
> +      - const: hdmi
> +
> +  pinctrl-0: true
> +
> +  pinctrl-names:
> +    items:
> +      - const: default

Drop both pinctrl entries.

> +
> +  power-domains:
> +    maxItems: 1
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Input port, usually connected to the output port of a DPI
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port that must be connected either to the input port of
> +          a HDMI connector node containing a ddc-i2c-bus, or to the input
> +          port of an attached bridge chip, such as a SlimPort transmitter.
> +
> +    required:
> +      - port at 0
> +      - port at 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names

Please keep the same order of things here and in main properties
section.

> +  - interrupts
> +  - power-domains
> +  - phys
> +  - phy-names
> +  - ports
> +

You need allOf: with ref to dai-common.yaml.

> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8195-clk.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/mt8195-power.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        hdmi-tx at 1c300000 {

hdmi@

Best regards,
Krzysztof